GA-M6610D four-ball friction tester

Описание

Эquipment introduction

The M6610D four-ball friction tester is mainly in the form of sliding friction to evaluate the bearing capacity of lubricant under extremely high point contact pressure.There are three indexes including maximum no-bite load PB, sintering load PD and comprehensive wear value ZMZ.The machine can also be used for long time wear resistance test of lubricants and measurement of friction coefficient.When the computer is connected, the friction and temperature curves can be recorded.If special friction accessories are used, rolling friction test, simulated wear test between various materials, end wear test and rolling fatigue test of steel ball can also be carried out.Before the test load reaches the maximum no-card bite load PB, it can be completely judged that the maximum no-card bite load has not been reached according to the control software of the testing machine. When the load reaches the maximum no-card bite load PB, it can be determined by the display curve of the software that the load is the maximum no-card bite load PB.Thus precise measurements can be made with a microscope.Save a lot of time and material resources.And can edit the control program to load.

GA-M6610D microcomputer control four – ball friction wear testerFriction and wear testerLubricating oil friction and wear tester

Applicable standards of this machine:

GB/T12583-98 Determination of extreme pressure properties of lubricants (four-ball machine method)

GB3142-82 Determination of bearing capacity of lubricants (four-ball method)

SH/T0189-92 Test method for wear resistance of lubricating oil (four-ball machine method)

SH/T0202-92 Test method for extreme pressure performance of lubricating grease (four-ball machine method)

SH/T0204-92 Test method for wear resistance of grease (four-ball machine method)

SH/T 0762-2005| Lubricating oil friction coefficient measurement method (four-ball machine method)

ASTM D5183-2005 Test method for determination of friction coefficient of lubricating oil with a four-ball wear tester

In practical application, users can choose different determination methods and evaluation indexes according to different USES of lubricants.

 

Main technical specifications:

The serial number	According to project name
1	Test force range (stepless adjustable)	10N~10kN
2	Relative error of test force indication	±1%
3	Keep the indication error when the test force is long	±1%F.S
4	Friction test range	0~300N
5	Friction test error	±2%
6	Spindle speed range (stepless adjustable)	100~2000r/min
7	Spindle speed error	±10 r/min
8	Temperature control range of friction pair	At room temperature~200C
9	Temperature control error of friction pair	±1C
10	Test time control range	1 second to 99 часы
11	Spindle speed control range	1 ~ 9999999 об/мин
12	Installation dimensions	1160mm×750mm×1640mm
13	The computer displays and records the curve of friction-time, temperature-time, test force-time
14	The net weight	800кг
15	Test ball	12.7мм
16	The power supply	380В,.60ХЗ(

Equipment accessories:

продукт	The host	1
	Компьютер, принтер, analysis software	Каждый 1 набор
	Wear and tear spot measurement solid microscope	1
	Plastic machine clothing	1
The attachment	Protective cover (plexiglass and steel)	Каждый 1 набор
	The normal temperature oil box	1 set each (one set with platinum thermal resistance)
	High temperature oil box (including heater)

 

 

Категория	Серийный номер	имя	Specifications and quantity	Specifications and quantity
accessories	1	Torque wheel (including 8108 bearings)	1	Steel band 2 root
	2	High temperature oil box seat	1
	3	Bhr-7a300n, 50N load sensor	Каждый 1 кусок	300 n with the host
	4	Collet chuck	4
	5	12.7 ball four ball machine is special	200 grains
	6	Power plug and connection	1 set of	2м
	7	Measuring microscope	1	Including 3 repackages
GA-M6610D microcomputer control four – ball friction wear testerFriction and wear testerLubricating oil friction and wear tester Technical parameters of inverter power supply: Two phase change three phase power supply DGBP
Circuit mode: IGBT/PWM modulation Форма выходного сигнала: standard sine wave CF=1.4 Входное напряжение: 1 фаза 2 + ground 220V±15% 50HZ/60HZ±3HZ Выходное напряжение: 3-phase 4-wire + ground wire voltage 380V fixed Выходной ток: phase current 16A Выходная частота: 50HZ fixed /60HZ fixed / 40-70hz continuously adjustable Frequency stability: ≤ 0.05mm Load stabilization rate: ≤ 1 can Коэффициент искажения формы сигнала: ≤ 2 painfully (Чистая нагрузка сопротивления) Фазовый угол: 120°±1° Peak factor ratio: 3:1 Panel display: выходное напряжение, выходной ток, output frequency, output power and output power factor (switch Отображать) Protection functions: output overcurrent protection, защита от перенапряжения, overtemperature protection, short circuit protection, self-diagnosis protection and reporting P device Protective response time: 2РС Machine efficiency: ≥ 87 Insulation withstand voltage: 1800VAC/10mA/1min Изоляционное сопротивление: ОКРУГ КОЛУМБИЯ 500 в / 50 m Ω Режим охлаждения: forced air cooling Noise: 1m less than 60db Operating environment temperature: 0~45℃ Относительная влажность: 0~ 95% (non-condensation state) Размер: 430 * 770 * 990 (мм) Масса: about 160KG