GA-CC10 Puncture Strength Tester
1
2

GA-CC10 Puncture Strength Tester

GA-KZYB Paper Tensile Testing Machine GA-KZYB Paper Tensile Testing Machine
GA-TQG645 Diaphragm Permeability Tester GA-TQG645 Diaphragm Permeability Tester

Категория:

Описание

GA-CC10 Puncture Strength Tester

Введение

GA-CC10 diaphragm puncture strength tester adopts automatic clamping device to complete the test automatically, with accurate and stable test data and good repeatability. Suitable for measuring the penetration resistance of battery diaphragm, фильм, packaging composite film, bag and other thin sheets against penetration by the puncture needle (puncture resistance, puncture strength or puncture elongation)

 

Рабочий режим:

Puncture resistance: The maximum force required for the piercing needle to penetrate vertically through the pattern.

Puncture strength: Test the puncture strength per unit thickness.

Puncture elongation: After the puncture needle contacts the sample, the starting point is when the force value reaches the pre-pressure, until the position distance of the puncture needle when the sample penetrates.

Метод испытаний:

Place the test piece with a diameter of 100mm on the fixture, press the test key to automatically clamp the sample, and then use a steel needle with a direct diameter of 1.0mm and a spherical tip radius of 0.5mm to remove the puncture at a speed of (50 × 5) mm/min or (100 × 10) mm/min to read the maximum load of the steel needle penetrating the test piece. The instrument calculates the puncture strength automatically. Примечание: If the number of test pieces is more than 5, the technical average is taken.

 

Стандарты:

GBT 37841-2019 Test method for puncture resistance of plastic films and sheets

GB/T36363-2018 Polyolefin separator for lithium-ion batteries

GB/T21302-2007 packaging composite film, bag general rules

GA-CC10 Puncture Strength Tester

Технические характеристики:

Force value error :±0.5% Measurement range: (0-50) Н

Разрешение: 0.01Н

Force resolution: 0.01Н

Puncture needle: Фи: 1.0мм

The tip is spherical R = 0.5mm;

Тест скорости: (100 oz 10)mm/min or (50 oz 5)мм/мин (необязательный)

Sample holding fixture: internal diameter of (10 0.1) mm or (50 0.5) мм (необязательный)

Источник питания: AC 220V±22V, 50Гц

Размеры: 330×350×390mm

Масса: Приблизительно. 20 кг

Man-machine interface: touch screen display in Chinese and English

Air compressor: user supplied

Connecting to a computer: Необязательный

 

GA-CC10 Puncture Strength Tester

Особенности продукта:

1, высокая точность

High precision force sensor is used to ensure the test accuracy error is within ±0.5%.

2. Good repeatability

The stepper motor is used to control the probe, the process is accurate and stable, and the measurement result is good repeatability.

3, легко использовать, простой в эксплуатации

LCD Chinese display, friendly man-machine interface operation. Automatic clamping device is used to complete the test automatically, with the function of statistical processing of test data, output by micro printer, and can also be connected to a computer. When connected to the computer, in addition to the automatic memory storage results, you can also display the burst curve and save.

4, easy to measure and calibrate

The instrument is equipped with a special calibration weight and built-in calibration program, which is convenient for the measurement and calibration department (third party) to calibrate the instrument.