GA-42 High Frequency Spark Tester
- Описание
- Расследование
Описание
Spark Tester
A.Function:
1.Fast recovery time after fault (0.1 второй).
2.Occupies short space in line and with improvement factor of 50 compared to
3.traditional CT power frequency electrode.
4.Voltage Display: 0.0~15.0KV digit, 14.2mm LED display, Точность +/- 1% чтения
5.Output Control: Front Panel Reset in Manual Mode. Closure time is selectable
6.0.2s/2s/5s in main board by jumper JP, Form C relay contacts (250VAC/5A) for all
7.wire faults detected.
8.Limits the fault current without damaging the test equipment.
9.Short exposure time to corona does not degrade nor damage good insulation.
10.Distinguishes all wire faults and detects bare wire.
11.Safety Switch interlock.
Spark Tester
| Product Name | Good quanlity High Frequency Spark Tester |
| Выходное напряжение | 0.0~15.0KV R.M.S. |
| Испытательное напряжение | 1.0~15.0KV R.M.S. |
| Cable Diameter | 0~25mm |
| Maximum Load Current | 4mA Resistive,40mA Capacitive |
| Output Frequency | 2.5-3.5KHznormal |
| Electrode lengths | Bead Chain 120mm |
| Fault Indication | Indicating lamp,Counting by Digital Counter |
| Output Control | 1 Form C relay Contacts(220VAC/5A)for all wire faults and bare wire
faults detected |
| Input Control | SP1, SP2 input interlock control |
| Operating Model | Extruder Continuous Application |
| Источник питания | 175~264 Volts, 180Вирджиния, Single phase, 50/60 Гц |
| Рабочая Температура | +4~45°C |
| Operation Humidity | <90%относительной влажности |
| Signal Cable Lengths | 5М |
| Масса |
Control Unit =5 kgs, Electrode = 8.5 kgs |
| Dimension Controller | 360(л)x485(Вт)x90(ЧАС) мм |
| Gauge Head | 330(л)x200(Вт)x390(ЧАС) |
| Line Speed |
2000 M/min. maximum* |
*Follow UL 44, any point on the wire being traveled for not less than a total of 18 positive or negative crests of the supplied voltage.
