Машина для испытания на растяжение GA-2000S

Описание

Машина для испытания на растяжение

я.Main functions

This machine is suitable for rubber, tire, hose, tape, подошва, пластик, фильм, acrylic, FRP, АБС, EVA, PU, aluminum-plastic pipe, composite material, waterproof material, волокно, текстиль, провод и кабель, бумага, gold foil, tape, шелк, spring, древесина, medical packaging materials, tape and other stretching, сжатие, рвущий, зачистка (90 degrees and 180 degrees Can) and other mechanical properties test and analysis.

This machine is a new type of material testing machine combined with electronic technology and mechanical transmission, the load, deformation, displacement measurement and control has a high accuracy and sensitivity, the series of models using a single space structure, test space in the next space, mainly suitable for test load less than 5kN metal, non-metal material test, with stress, strain, displacement control mode. The maximum force, предел прочности, изгибающая сила, прочность на сжатие, модуль упругости, elongation at break, yield strength and other parameters can be calculated.

Машина для испытания на растяжение

II.Introduction of control software

• Software operating system language: Simplified Chinese/English.
• Force unit: Н, КН, кгс, Lbf, length unit: мм, см, in can be freely converted;
• Automatic return to zero: the measuring system will automatically return to zero when the computer receives the test start instruction;
• Режим отображения: data and curve dynamic display with the test process;
• Result reproduction: the test results can be accessed at will, and the data curve can be re-analyzed;
• Result comparison: Multiple test characteristic curves can be superposition, reproduced, enlarged and presented in different colors for analysis and comparison of a group of samples;
• Emergency stop: equipped with emergency stop switch, used to cut off the power supply of the machine in emergency;
• Режим управления:
• Computer software to set speed, set load break (rupture), running time and other control methods

u ·automatically determines material fracture, crushing, и т. д., and automatically stops, and can be set to automatically return

• Type of curve:

u ·load-displacement, load-time, displacement-time.

u ·stress-strain, strain-time, stress-time.

u ·The vertical and horizontal coordinates of the curve can be set arbitrarily.

• Available test information:

u ·Maximum strength, minimum strength, breaking value, upper and lower yield strength, предел прочности, прочность на сжатие, модуль упругости, elongation, максимум, минимальное значение, average value of stripping interval, и т. д.. With overload, сверхток, перенапряжение, пониженное напряжение, overspeed, stroke and other multiple protection.

u ·The data results are exported in the crystal report format currently accepted by the national standard.

Машина для испытания на растяжение

III.Технический параметр

Capacity selection	KN 10KN 20KN Optional, American brand high precision load unit
Precision class	Уровень 0.5
Effective force measurement range	0.4％～100％
accuracy of force measurement	Within ± 0.5% of the indicated value
Testing machine resolution	The maximum load is 1/± 250,000 yards, the internal and external files are not divided, and the whole resolution is unchanged
Load sensor	Базовая конфигурация: Tension and pressure sensor (максимальная нагрузка)
Effective test width	400мм
Effective stretching space	More than 1400mm (without fixture) (more than 500mm inside the box)
Test speed range	0～500mm/min
Displacement measurement accuracy	Within ± 0.5% of the indicated value
Test bench safety device	Electronic limit protection
Test bench return function	Manual or automatic options, after the end of the test automatically or manually return to the initial position of the test
Защита от перегрузки	Over 10% of the maximum load, the machine automatically protects
Fixture configuration	Stripping fixture set
Размер основного двигателя	800×500×2500mm
Electric machine	220V±10% 0.4KW Japan Tama River servo motor
Driving mechanism	High precision ball screw
Main engine weight	(О) 460 Кг