GA-1802-A Прибор для измерения цилиндрическости

Описание

Прибор для измерения цилиндрическости

Principle of instrumental measurement

Using radius measurement method, workpiece rotation. High precision air floating spindle is used as reference. Using imported precision circular grating, precision inductance displacement sensor and computer components. Measure the Angle and radial displacement of the measured workpiece to ensure the accuracy of the angular displacement and radial value of the measured workpiece; The measurement software adopts CA system measurement software based on Chinese Windows operating system platform to complete data collection, data processing and printing.

Прибор для измерения цилиндрическости

Measurement functions

Функция измерения: cylindricity meter, roundness, straightness, coaxiality, concentricity, end runout, end runout, verticality, parallelism, flatness

Analysis functions: surface waviness, spectrum analysis, wave height analysis, adjacent chip runout, segment difference

Roundness evaluation method (4 kinds) : minimum area method, least square method, minimum circumscribed circle method, maximum circumscribed circle

Roundness filtering method: 1, 1-500, 1-150, 1-50, 1-15, 15-500

Waviness filtering: 3-16, 3-17, 15-500, 17-100

Filtering form: Gaussian (ISO standard)

Прибор для измерения цилиндрическости

Use requirement

Air compressor air source pressure: 0.45 ~ 0.80Mpa

Air compressor air source flow: ≥0.2m3/min

Power requirement: about 500W; Ac 220V±10%, 50Гц

Environmental requirements: температура: 10 ~ 30 ℃; Относительная влажность: < 85%

There is no obvious vibration source at the installation site

Separate ground

Прибор для измерения цилиндрическости

Техническая спецификация

Элемент		Спецификация
Диапазон измерения	Max diameter	ф300mm
	Min inner diameter	ф3mm
	Max height	420мм
Accuracy of principal axis	radial error	±(0.025+5H/10000)мкм
	axial error	±(0.025+6X/10000)мкм
Parallelism between axis of rotation and z-axis guide rail		2μm/300mm（Busbar benchmark）
workbench	Mesa diameter	φ160 мм
	swing diameter	φ320mm
	load capacity	30Кг
	adjustment range	Adjustable eccentric±2mm ; Adjustable level±1°
	скорость вращения	0-12 rpm（adjustable）
Column	Straightness (narrow range)	0.5μm /100mm
	Straightness (full range)	0.8μm /300mm
horizontal arm	Horizontal travel distance	160мм
	Move speed	0.5-6mm/s OR MANUAL
Датчик	Гладить	500мкм (Radius difference)
	разрешение	0.005мкм
	Needle shape	Ruby ball probe（diameter 2mm）
	Sensor direction/adjustment Angle	either direction/±45°
data collection		Imports grating 7200point/week
magnification		Any to a maximum of 200,000 раз

 

Параметр

（Product）				(Packing)				Масса(Wt.kg)	Volume（CBM m³）
Lx	Ly	Lz	Wt(кг)	Lx	Ly	Lz	Wt(кг)
960	650	1550	240	1000	750	1650	50	290	1.23