GA-1014 Малая вулканизационная машина для пластин

Описание

Небольшая машина для вулканизации пластин

Обзор

This series of plate vulcanizing machine is used for pressing all kinds of rubber model products and non-model products, and also can be used for pressing all kinds of thermosetting plastics and foaming rubber and plastic products.With independent power mechanism and electrical system, using the button control.Working pressure and heating temperature can be adjusted within a certain range.This machine is divided into two types: manual and semi-automatic

Небольшая машина для вулканизации пластин

Application industry

Laboratory small plate vulcanizing machine is also called hot press molding machine, mainly used for rubber, plastic products sample making experiments, такой как: Тест на растяжку, impact test, compression test sample preparation.

Пластическая промышленность: laboratory sample making, small batch trial production, исследования и разработки,PPT,ЧП,PVC and so on.

Rubber industry: laboratory sample making, small batch trial production, исследования и разработки, natural rubber, силикон, резинка, и т. д..

Небольшая машина для вулканизации пластин

Технические характеристики

1, емкость: 5-30ton adjustable [with automatic exhaust function]

2, диапазон температур: normal temperature ~ 300℃

3, temperature accuracy: ±1.5℃

3, Temperature controller: PLC touch screen

4, temperature control mode: PLC touch screen

5, heater: electric heat pipe heating

6, Рабочий режим: electric heating.Heating mode: electric heating.

7, heating time: room temperature ~ 160℃ about 15min

8, timer: PLC display, 0.01s ~ 999min ~ 999hr (регулируемый)

9, two layer hot pressing plate: 350× 350 мм (high hardness steel plate with special treatment) electric heating.

10, exhaust function: low pressure automatic exhaust a minute 3 ~ 10 times adjustable

11, hydraulic system: proportional hydraulic flow closed loop control system, GPY oil pump (Японский) drive high performance electric hydraulic with high precision of the resistance of cylinder piston implementation such as speed control mode (travel height can be set in a single freedom) with automatic pressure compensation function, pressure time can be preset, load power, steady lifting, automatic pressure, pressure, pressure relief

12, cylinder stroke: Max 300mm

13, cylinder speed: 11мм/с

14, pressure gauge: 0 ~ 200kg/sq.cm

15, объем :(Ш×Д×В)1600×650×1560 mm

16. Источник питания: 3∮, AC380V, 15А

17, масса: about 720kg