4U4I Тестер распределительных терминалов

Описание

Distribution terminal tester

Обзор продукта
Automated test solution: to achieve the distribution network 10~35kV automatic terminal equipment protection function, “three remote” performance, 101/104 communication protocol, feeder automation and other functions of automated testing, высокая точность, высокая скорость, convenient transportation.

One-key automatic test for distribution automation terminal equipment (DTU, FTU, TTU, fault indicator) без ручного вмешательства.

Complete the functions of virtual master station and monitoring master station, complete the function test of communication, joint adjustment and point in single-machine mode.

Synchronous fault simulation of multi-point DTU/FTU and TTU terminals is realized without power outage, fault area judgment, fault isolation and power supply recovery strategy execution are carried out with the main station, and complete feeder automation (FA) function test is realized.

It can customize the test scheme library for different terminals, intelligent matching and one-click testing during testing, and generate standard test reports.

Support IEC101, IEC104 and other communication protocols, and import the protocol point table of major distribution automation terminal manufacturers with one click.

It can read the fault recording data file, playback the action behavior and inversion function in the case of fault waveform.

4 channels 264V voltage, 4 channels 30A current output (short time 100A output), accuracy up to 0.05 уровень.

4 channels of voltage, 4 channels of current sampling, sampling accuracy up to 0.5%8 channels open.

Route 8 out; The opening speed can reach 0.1ms; Open access supports adaptive active and passive input.

Provide network port, serial port 232/485, USB, GPS, Wi-Fi, 4G and other communication interfaces.

Предоставлять 1 0-60V DC voltage output, accuracy up to 0.1%; 1 channel 4-20mA DC current output, error ±0.02ma.

10.4 inch large Windows operating interface, reasonable layout, простота в эксплуатации.

It can be operated by an external PC

Distribution terminal tester
Технические характеристики
 The instrument can be used alone or in connection with a PC.
 device with 4 voltage and 4 текущий.
 The output accuracy of the equipment can reach 0.05%.
 automatically reads the protection setting parameters and the status of the pressure plate, and supports the operation of modifying the setting value and dropping the pressure plate.
 can automatically complete the “three remote” and its response time test.
 program can automatically complete phase overcurrent, zero sequence overcurrent, zero sequence overvoltage, low voltage alarm, overvoltage alarm, reclosing and other fixed value check.
 with punctuality circuit, built-in lithium battery, equipment power off 12 hours clock error is less than 1ms;
SOE resolution and remote signal jitter test.
 supports mainstream protocols such as State Grid 101, 104, IEC61850, and can be tested.
 The software has complete functions, and automatically generates test reports and saves them in the tester. When using online, you can operate the control instrument, import test data, store test data, generate data reports, generate data curves, generate EXCEL reports, и т. д..
 The instrument has the function of overheat, overcurrent and overvoltage protection.
 The instrument has strong anti-interference ability and strong electromagnetic compatibility.