Vertical type X fluorescence analyzer EDX cement – 8800 – m MAX is applied to the analysis of cement composition
The cement is powdery hydraulicity inorganic gelled material. Can add water after mixing into slurry, hardened hardening or in the water in the air, and can the material such as sand, stone firmly cemented together. Early lime and ash mixture and modern lime ash cement is similar to concrete made of cement macadam with it, not only high strength after hardening, but also can resist the erosion of fresh water or salt water. Pentru o lungă perioadă de timp, it as an important kind of gel material, widely used in civil construction, water conservancy, national defense and other projects. The cement factory quality certificate shall have the manufacturer seal of quality department; Tests, its test report should have serial number, so that related to the laboratory data verification check, and should have a clear conclusion, signed and sealed is complete; The manufacturer of cement strength of 28 days fill declaration cannot lack; Use the unit must carefully check the validity of the cement, outstanding for cement, must do a second interview, and must be carefully check all the test reportWhether the measured values conform to the specifications stipulated in the standard value; For cement quality problems, according to the test report of the data can be downgraded, but must go through the related technical director to sign for approval, and shall indicate the name of the use of engineering, the use of parts. If is the continuous construction of the project, the adjacent two cement test time shall not exceed its validity.
Vertical type X fluorescence analyzer EDX cement – 8800 – m MAX is applied to the analysis of cement composition
EDX8800M MAX spectrometer is mainly used in high precision in the third party lab and all kinds of needed materials composition analysis. EDX8800M MAX focus on the main quantity of various materials, microelements and trace elements or compounds for qualitative and quantitative analysis, is widely used in: metal materials, precious metals, iron, non-ferrous metal and powder, mineral, metalurgie, metal and non-metallic mineral refractory materials, materiale refractare, dioxid de titan, stone, catalysts, ceramică, ciment, lime, sticlă, quartz, feldspar, square solution Stone, clay, rock wool, soil, solid waste, dust, the palatial, fly ash, red and rare earth permanent magnet, oil, oil products, such as slag production of raw materials and finished product chemical composition and quantitative analysis of fast, fast accurate nondestructive efficient environmental protection, do not need to acid and alkali chemical agents.
The following is a EDX8800M MAX test of cement test report:
