GA-S100 Akron Abrasion Tester

Descriere

GA-S100 Akron Abrasion Tester

Instrument Application:

Used to determine the abrasion resistance of vulcanized rubber. The test sample is rubbed against a grinding wheel at a specific angle and under a specific load, and the wear volume of the sample over a certain distance is measured.

GA-S100 Akron Abrasion Tester

Standarde:

GB/T 1689, BS 903, JIS K6264, CNS 734

GA-S100 Akron Abrasion Tester

Technical Specifications:

1. Grinding wheel specifications: Grinding wheel diameter: 68±1mm, grosime: 12.7mm±0.2mm, hardness: 75~80 degrees (Shore A), center hole diameter: 12.7mm
2. Test sample: Strip shape, lungime (D+2h)πmm, lăţime: 12.7mm±0.2mm, grosime: 3.2mm±0.2mm.
Notă: D is the grinding wheel diameter, h is the test sample thickness, and π is pi.
3. Sample shaft rotation speed: 76±2 rpm (GB standard); 250±5 rpm (BS standard)
4. Sample tilt angle range: 0°~45°
5. Sarcină: 26.7±0.2 N
6. Grinding wheel specifications: Diameter 150 mm, grosime 25 mm, center hole diameter 32 mm, grit size 36#, abrasive is alumina
7. Grinding wheel shaft rotation speed: 34±1 rpm
8. Tejghea: 0~999, 999
9. Dimensiuni: 58×52×46 cm (L×L×A)
10. Greutate: 60 kg
11. Alimentare electrică: AC 220V, 50 Hz

GA-S100 Akron Abrasion Tester

Basic configuration:

One main unit, one power cord, one set of instruction manual/certificate of conformity/warranty card/nameplate.