- Descrição
- Investigação
Descrição
Testador de abrasão úmida
According to ASTM D 2486 e ISO 11998.
Abrasion resistance is an important property for paint and coatings.
It’s also common for tile, flooring, furniture, wall coverings, shower stalls, and bath tubs.
The tester produces a repeatable, controlled condition to simulate everyday use or wear pattern.
With a flexible design to use brushes, sponges, abrasive pads, and sand paper to wear the surface.
Besides abrasion testing, washability tests can also be performed.
Stain resistance and detergent testing are additional uses for abrasion testers.
Testador de abrasão úmida
Características
Reciprocating linear motion at 37 cycles per minute.
Constant speed control over 450mm travel.
For wet or dry abrasion testing.
Preset count-down counter with automatic shut off.
Heavy duty drive system for low maintenance and long life.
Utilizes brush, sponge, abrasive pads, and sand paper.
Testador de abrasão úmida
Dados Técnicos
| Brush Specification | Each 34X86mm base plate is covered with 45pcs Ф3 holes and the length of wool is 20mm |
| Scrub Rate | 37±1cpm |
| Stroke Length | 300milímetros |
| Abrasion Head Load | 450g±2g |
| Digital Counter | 5-dígito |
| Dimensões | 580×480×300mm |
| Counter range | 99999vezes |
| Test plate size | 430X150X3mm |
| Motor power | 25C |
| Poder | 22050Hz |
| Tamanho externo | 580X420X280mm |
| Shipping Weight | 25KGS |
acessórios opcionais
| Nome | Accessories and spare parts |
| Pig hair brush | ASTM-D 2486，tamanho：38×90mm |
| Scrubbing pad | ISO 11998，tamanho：38×90mm |
| Scrub piece | ASTM-D 2486，100peças(provide 2pcs free) |
| Adjust parts | ASTM-D 2486， connector consists of two brushes |
| Adjust parts | ISO 11998，connection consists of two scrub pads |
Basic equipment configuration:
washing machine
Stand for two brushes
Two pig brushes and connecting components
Submersible pump and liquid box
