Borracha GA-1018-B sem reômetro de rotor

Descrição

Borracha GA-1018-B sem reômetro de rotor

Visão geral

The rotor-free vulcanizer is the most widely used instrument in the rubber processing industry to control the quality of rubber, rapid inspection and basic research of rubber. It provides accurate data for the optimized formula combination of rubber, and can accurately determine the parameters such as coke burning time, positive vulcanization time, vulcanization index and maximum and minimum torque.

The vulcanization meter consists of: host, computer, medição de temperatura, temperature control, data acquisition and processing, sensor and electrical linkage, etc.The measurement and temperature control circuit is composed of measurement and control module, platinum resistor and heater, which can automatically track the change of power grid and environmental temperature, and automatically correct PID parameters, so as to achieve the purpose of fast and accurate temperature control.The data acquisition system and the electromechanical linkage can automatically detect the moment signal of rubber vulcanization process and automatically display the temperature value and set value in real time.After curing, automatic processing, automatic calculation, printing curing curve and process parameters.Display curing time and curing moment.The computer displays the vulcanization process in real time, from which the change of “temperatura” and the change of “time-torque” can be clearly seen.

Borracha GA-1018-B sem reômetro de rotor

Machine features

This test instrument has the following characteristics:

1. High precision and wide range of temperature control.(plus or minus 0.1 ℃)
2. Clock programming function.(Setting and modifying time)
3. Technologically advanced switching power supply, wide range of voltage regulation.
4. Imported integrated circuits and control components.
5. English language.
6. Meet the requirements of GB/T16584 (rubber vulcanization characteristics tested with a rotor-free vulcanization meter) and ISO6502.

The powerful microprocessor USES high quality imported chips.For one thing, computers and microprocessors can take signals from torque sensors and record them on graphs.At the same time, the computer and the module interface for data exchange, and control the cavity temperature.

G.The rotor-free vulcanizer was designed with a series of interlocking features, including closing plastic glass doors.If the door is not closed, the mold cannot close.Only when the door is securely closed can the mold be closed.In order to work.

In a word, compared with other models, this type of vulcanizer is more stable in performance, more accurate, cheaper in quality and complete in function.It is the best instrument for testing rubber properties.

Borracha GA-1018-B sem reômetro de rotor

Especificações técnicas

The standard of the vulcanization meter is ASTM D5289-95 ISO6502-1999 (E) GB/T16584-1996

Faixa de temperatura: temperatura do quarto –200℃

Temperature measurement accuracy: ≤±0.1℃ when 100-200 ℃

Temperature control stability: ≤±0.1℃ at 100-200 ℃

Setting range: 0-200 ℃;Set the minimum unit: 0.1℃

Temperature display range: 0-200 ℃;Resolução de vídeo: 0.1℃

Set the time range: 0-200 minutos;Set the minimum unit: 1 minuto

Automatic range switching: increases automatically according to the actual torque

Fonte de energia: 50Hz, ~ 220V±10%, 50±1Hz, must be well grounded

Compressed air: 0.32mpa controlled by pneumatic control valve

Oscillation frequency: 100 vezes/min (about 1.7Hz)

Temperatura ambiente: normal temperature –40℃, relative humidity less than 80%, no corrosive gases in the air

Material quality: 250 kg

Poder: 2 kw

Dimensões: 680×630×1100 (milímetros)

Borracha GA-1018-B sem reômetro de rotor

Structure

Rotor-free vulcanizer is an intelligent instrument, which combines the mechanical and electrical principles.It consists of the following parts:

1. Mechanical part: consisting of housing, upper and lower mold, vibrator, force sensor and transmission;
2. Air compressor control system: air compressor is composed of three parts: air cylinder, solenoid valve and air compressor;
3. Electric control system: composed of temperature measurement and control system and door control device;
4. Test and control system: mainly consists of microprocessor, computer control system, data acquisition device, AC device, data processor, motor control, open and close mode control, report printer.The printer is an HP printer and the paper is A4 paper.