Testador de número de bobina CH1200
- Descrição
- Investigação
Descrição
Testador de número de bobina CH1200
Product Detail
CH1200 coil turns tester series can conveniently test the turns and DC resistance of various winding coils. This series of instruments is suitable for testing various types of winding coils such as motors, transformers, generator windings and relay coils. The instrument has the characteristics of intelligence, novel appearance, high test accuracy, high speed and convenient use. It can greatly improve the test efficiency without calibration and range change.
Características:
■ New improved circuit design,
■ Dual control by CPLD and MCU
■ Fast measurement, maior precisão
■ The resistance is tested by quasi-four terminals.
■ Wide measuring range
Testador de número de bobina CH1200
Parâmetros
| modelo | CH1201 | CH1201R | CH1200 | CH1200R |
| Test sensor specifications | Ф9.5 Ф6 Ф4 | |||
| Measured coil shape | Diâmetro interno > ф 4mm outer diameter < ＜120mm height < ＜110mm | |||
| Number of turns test range | 1 ~ 80000 laps | 1 ~ 30000 laps | ||
| Accuracy of lap number test | 1 ~ 300 ciclos 0 ciclos 300 ~ 500 ciclos 1 cycle 500 ~ 20000 ciclos 0.2% 20000 ~ 80000 ciclos 0.5% | 1 ~ 500 ciclos 1 cycle 500 ~ 30000 ciclos 0.3% | ||
| Basic measuring speed of turns | Rápido 3 tempos/segundo | Lento 1.5 tempos/segundo | ||
| Resistance test range | NÃO | 100uΩ～200KΩ | NÃO | 100uΩ～20KΩ |
| Basic measuring speed of resistance | NÃO | 5 tempos/segundo | NÃO | 3 tempos/segundo |
| Resistance test accuracy | NÃO | 0.20% | NÃO | 0.20% |
| Range mode | automatic selection | |||
| modo de exibição | 6-bit LED display | |||
| Signal selection | Open、phase、mute optional | |||
| Tamanho (W × H × D.) | 335mm×320mm×290mm | |||
| peso | About 6Kg | |||
| Operating temperature and humidity | 0℃～40℃，≤90% UR | |||
| exigência de energia | 198-242VAC 47.5-52.5Hz | |||
| power consumption | ≤30VA | |||
| remarks | To ensure the measuring accuracy of the instrument, please use ф 9.5 sensor when the inner diameter of the tested coil is greater than 30mm. | |||
