ISO 17872-2019 – Primer Guide for Marking with Paints and varnishes on Sheet Metal Coatings for corrosion Testing
Um Prefácio
ISO (Organização Internacional para Padronização) é uma aliança global de organismos nacionais de normalização (Órgãos membros da ISO). O desenvolvimento de padrões internacionais é geralmente realizado através de comitês técnicos ISO. Cada instituição membro interessada em um assunto sobre o qual tenha sido estabelecido um comitê técnico tem o direito de ser representada no comitê. Organizações internacionais governamentais e não-governamentais que colaboram com organizações de normalização também estão envolvidas neste trabalho. A ISO trabalha em estreita colaboração com a Comissão Eletrotécnica Internacional (CEI) em todos os assuntos de padronização elétrica.
Os procedimentos utilizados para desenvolver este documento, bem como aqueles utilizados para manutenção adicional estão descritos na Parte 1 da Diretiva ISO/IEC. Em particular, atenção deve ser dada aos diferentes critérios de aprovação exigidos para diferentes tipos de documentos ISO. Este documento foi elaborado de acordo com as regras editoriais da Parte 2 da Diretiva ISO/IEC (veja iso.org/directives).
ISO 17872-2019 – Primer Guide for Marking with Paints and varnishes on Sheet Metal Coatings for corrosion Testing
Observe que determinados conteúdos deste documento podem estar sujeitos a direitos de patente. A ISO não é responsável por identificar nenhum ou todos esses direitos de patente. Details of any patent rights identified during the development of the document will be in the introduction and/or in the ISO list of patent claims received (veja iso.org/patents).
Quaisquer nomes comerciais utilizados neste documento são fornecidos como informação para conveniência do usuário e não constituem um endosso.
Voluntário, related standards and conformity assessment related ISO specific terminology and express the meaning of and the ISO in the technical barriers to trade (TBT) aderir ao princípio da organização mundial do comércio (OMC) Informação, please see the iso.org/iso/foreword.html.
Este documento foi preparado pelo Comitê Técnico ISO/TC 35, Tintas e vernizes, Subcomitê SC 9, General Test methods for paints and varnishes.
The second edition cancels and replaces the technically revised first edition (ISO 17872:2007). Comparado com a edição anterior, As principais mudanças são as seguintes:
– Artigo 2 “Normative reference” and Article 3 “Termos e definições” have been added;
– Added L-shaped and diagonal scribe graphics;
ISO 17872-2019 – Primer Guide for Marking with Paints and varnishes on Sheet Metal Coatings for corrosion Testing
— A second variant of the cross-section shape marked with a U-dot is added to Figure 2;
– V-shaped replaceable inserts, disc milling cutters, engravers and ceramic cutters have been added to the list of possible cutting tools;
– The cross section picture has been added to the corresponding cutting tool;
– Examples of cutting tools in Table A.1 have been grouped into knife or insert tools, pencil tools, and milling machines;
— The original Appendix B has been replaced by a new annex that presents examples of the different results that may occur in a corrosion test when different marking tools are used.
Qualquer feedback ou dúvida sobre este documento deve ser direcionado ao órgão de padrões nacionais do usuário. Uma lista completa dessas agências pode ser encontrada em iso.org/members.html.
ISO 17872-2019 – Primer Guide for Marking with Paints and varnishes on Sheet Metal Coatings for corrosion Testing
Introdução
Many international standards deal with corrosion tests in which scribe marks are introduced through coatings on metal substrates. No entanto, the methods introduced by the underline mark (underline patterns, ferramentas, etc.) are not standardized in these standards.
The main purposes of deliberately causing damage to the coating prior to corrosion testing are as follows:
1) Simulate and study how to ensure the adhesion of coating caused by damage after exposure;
b) Obtain an accelerated response during corrosion testing, such as quality control in the production process;
c) Study the general durability of the coating by observing the corrosion rate as damage spreads after exposure.
Preliminary investigations indicated the use of several scribing tools in terms of shape and size. These differences occur both between and within countries. The effect of using different tools is to produce streaking marks with different cross-section shapes, depths and bare metal areas. These differences will greatly affect the test results obtained during the corrosion test, as the purpose of introducing the marking into the coating system is to enable the oxygen and electrolytes present during the exposure test to enter the well-defined and active metal surface.
The actual method used to introduce scribble marks depends on the coating type and thickness. No entanto, in all cases, the recommendation is that the cross section be as smooth as possible, the metal substrate be evenly exposed, and there is no coating residue on the exposed substrate.
ISO 17872-2019 – Primer Guide for Marking with Paints and varnishes on Sheet Metal Coatings for corrosion Testing
1 Escopo
This document describes a method for performing corrosion tests on scrip-coated steel or specimens, where the coating system is applied at a dry film thickness of less than 500 μm. It is only used as a guide, based on the results of cooperative tests, and no subsequent corrosion tests are conducted to determine whether the introduced scribe marks are suitable for such tests.
This document covers the marking of metal panels or test pieces (chemically or non-chemically treated) made of:
– Steel;
– galvanized steel;
– liga de alumínio;
— Magnesium alloy.
It does not include the streaking of electroplated metal or composite aluminum plates.
2 referências normativas
Os documentos a seguir são referenciados no texto de forma que parte ou todo o seu conteúdo constitua os requisitos deste documento. Para referências datadas, apenas a versão citada se aplica. Para referências sem data, a nova versão da referência (incluindo quaisquer revisões) aplica-se.
ISO 4618, Tintas e vernizes — Termos e definições
ISO 17872-2019 – Primer Guide for Marking with Paints and varnishes on Sheet Metal Coatings for corrosion Testing
3 Termos e definições
Para efeitos deste documento, os termos e definições dados na ISO 4618 apply.
ISO e IEC mantêm bancos de dados terminológicos para padronização nos seguintes endereços:
– Plataforma de navegação on-line ISO: disponível em iso.org/obp
– Enciclopédia Eletrônica IEC: disponível em electropedia.org/
Apenas o componente de informação padrão está disponível publicamente. Para ver o conteúdo completo, você precisará adquirir os padrões por meio de canais formais.