WES-1000D Digital Hydraulic Universal Testing Machine
- Description
- Inquiry
Description
Universal Testing Machine
1.Introduction
The main engine is two columns, two bars, oil cylinder, and the stretch space is above the host, and the compression and bending test space is between the lower beam of the host and the table.The measuring instrument adopts high definition LCD display, the experimental data is convenient and intuitive.
Universal Testing Machine 2.
Transmission system
The lower beam can be adjusted by using the motor driven by the reducer, the chain drive mechanism and the screw side drive, and realize the adjustment of the drawing and compression space.
3,The hydraulic system
The hydraulic oil in the oil tank pumps the high-pressure pump into the oil circuit through the motor, which flows through the high pressure filter and sends back the oil valve and enters the cylinder.The measuring instrument collects and analyzes the data through the sensor, and shows the constant force value. The tester realizes the speed of the test force by controlling the flow through the oil delivery valve.
4.The force measurement and control system
l support for tensile, compression, shear and bending test;
l manually adjust back to the oil valve, concise and flexible operation;
l support custom test parameters;
l electronic load, the liquid crystal display test force peak time curve, test, test forces, has obvious yield properties of the material yield strength;
l convenient query results;
There is a microtyping machine.
Universal Testing Machine
5.Main performance technical indicators
| Max force（kN） | 1000 |
| Test force measurement range | 4%-100% |
| Test force indication relative error | ＜ The value for±1% |
| Maximum tensile test space（mm） | 600 |
| Compression space（mm） | 500 |
| The piston stroke(mm) | 200 |
| Column spacing（mm） | 585 |
| The maximum clamping range of a round sample（mm） | Φ13-Φ40 |
| The maximum clamping thickness of flat sample（mm） | 0-30 |
| The maximum clamping width of flat sample（mm） | 75 |
| The pressure plate size（mm） | φ160mm |
| The clamping way | Hydraulic automatic clamping |
| Main frame size（mm） | 900*710*2250 |
| Oil source console size（mm） | 600×500×1250 |
| Total motor power（kW） | 2 |
| The total weight（kg） | 2750 |
