GA-8503B Edge Pressure Sampler

Description

GA-8503B Edge Pressure Sampler

Product introduction:

Corrugated cardboard edge compression strength test and bonding strength test necessary special sampler, can quickly and accurately cut the standard test size, corrugated cardboard and carton production, scientific research and quality supervision and inspection departments ideal auxiliary test equipment.

Product features:
It can cut the sample with accurate parallelism, there are marks on it, and parallel spacing can be set;
Adopt the imported sliding track, closely match with the imported blade from Japan, easily cut out the multi-layer cardboard sample;
The scale adopts laser engraving, clear scale, durable and easy to clean;
With powerful magnets, the blade is easier to install.

GA-8503B Edge Pressure Sampler

Note:
1. The incision direction must be parallel or perpendicular to the corrugated direction, and the test sample must not be loosened during the cutting process;
2. After each cut, pull the handle back to the position to be cut;
3. Do not put your hand on the cutting position to prevent injury;
4. If the cut of the sample is seriously curled or skewed, the blade should be replaced. The blade used can be any commercially available blade of the same type (replacement method: loosen the screw on the tool holder assembly, remove the old blade, replace the new blade, adjust the position and Angle of the blade, and tighten the screw);
5. When not used for a long time, the blade and guide post should be coated with anti-rust oil, and the cover should be dustproof;
6. Guide sleeve assembly and guide post should be often filled with a small amount of lubricating oil.

GA-8503B Edge Pressure Sampler

product specification