GA-66 Pendulum impact test instrument

Comply with standards and conditions

GB/T11918.1-2014 Plugs and sockets and couplers for industrial use – Part 1: General requirements, Chapter 24.2

Sample and limit	Electric vehicle charging interfaces, industrial plug sockets and couplers
Test use	Used for mechanical strength testing of electrical accessories such as plugs and sockets for charging vehicles
Test principle	By dropping the impact element of equivalent mass freely at a certain height, the required impact energy is obtained according to the gravitational potential energy and kinetic energy
Structure and characteristics	The mounting bracket can be adjusted front and back, and the impact Angle can be adjusted
Use environment	Dimensions: about W500*D500*H1500mm, Weight: About 60kg

Main performance index
Mode of operation	Manual operation
The pendulum strikes the weight	Φ50 * 16 mm; 304# stainless steel 0.25Kg impact weight
Combined impact weight	0.5Kg(low energy)(2 0.25Kg weights):1Kg(high energy)(4 0.25Kg weights)
Impact energy	1~6J(impact hammer is interchangeable)
Pendulum anvil	Φ50
Release impact Angle	25°, 35°, 36°, 42°, 47°, 52°
Test fixture	Can move forward and backward left and right and 90 “rotation
Pendulum material	Steel pipe with outer diameter of 10 mm and wall thickness of 1.0mm
Length of pendulum axis	1m, distance from pivot to impact element center
Mounting plate	8mm thick stainless steel plate, made according to the aperture and position specified by customers, with a set of standard
Impact height	776mm, 833mm
Bottom plate	plywood
X//z axis travel	The movable range is greater than 300mm