Tonghui TH2882A-5 Impulse Winding Tester

Cechy
Low inductance impulse test: down to 10μH
Low energy test without damaging the coil
Fast detection of winding insulation at a speed of 5.5 meas/sec
4 kinds of waveform comparison methods
Aż do 40 MSPS sampling rate
320×240 dot-matrix graphic LCD display
Chinese and English operation languages
Fridndly user’s interface and easy operation
Multi-trigger mode programmable
Napięcie, Time and Frequency measuring function
Direct display of comparison result
Keyboard lock and password protection function
Handler, RS-232C, and GPIB(opcjonalny) interfaces
500 groups of waveforms can be stored in USB disk (opcjonalny)
Multi-channel scan control interface: Skaner (opcjonalny)

Model		TH2882A-3	TH2882A-5	TH2882AS-5
Output Impulse Napięcie		300V-3000V, 50V Steps ± 5% of set value ± 15V	500V-5000V, 100V Steps ± 5% of set value± 25V
Voltage Control Mode	Normal	Voltage programmable at the measurement terminals when terminals opened
	Constant	Maintaining selected voltage across the winding independent of changes of the winding impedance
Impulse Energy (1K ohm Resistive Load)		≤ Max. 90 milli-Joules	≤ Max. 250 milli-Joules
Type of Coil		Jednofazowe		Three-phase three-wire system Three-phase four-wire system
Inductance Range		≥ 10μH	≥ 20μH	≥ 200μH
Wyświetlacz	Ekran Mode	320×240 dots LCD
	Waveform Display Dots	240×200 dots
	Wyświetlacz Informacja	Setting parameter, Standard & measuring waveform, Pomiar & comparison result
Waveform Próbowanie	Sampling Rate	40MSPS/25ns, 20MSPS/50ns, 10MSPS/100ns, 5MSPS/200ns, 2.5MSPS/400ns, 1.25MSPS/800ns, 625kSPS/1.6μs, 312kSPS/3.2μs
	Rezolucja	digits
	Sampling Length	Bytes
Input Impedance		10M ohm (Resistive voltage divider)
Measuring Speed		5.5 times/sec (Waveform display OFF, PASS/FAIL ON)
		3.3 times/sec (Waveform display ON, PASS/FAIL ON)
Average Rate		1-99, Programowalne