GA-7003-A Tester wibracji elektromagnetycznych w pionie
- Opis
- Zapytanie
Opis
GA-7003-A Tester wibracji elektromagnetycznych w pionie
1.Wstęp
Przegląd produktów: electromagnetic vibration test series are widely applicable to national defense, aerospace, communications, electronics and automobiles
Home appliances and other industries.This type of equipment is used to detect early faults, simulate actual working condition assessment and structural strength test. The product has a wide range of applications, a wide range of applications, remarkable test results and reliability.
◎ it has constant vibration amplitude and constant acceleration vibration
◎ the system is equipped with a high-precision vibration sensor to collect the acceleration, amplitude and frequency in real time
GA-7003-A Tester wibracji elektromagnetycznych w pionie
2.parametry techniczne
| Frequency modulation range (Hz | 5~500 | Sweep frequency range (Hz) | 5~500 |
| Maksymalne przyspieszenie (m/s2) | 170 | Maksymalne obciążenie testowe (kg) | 20 |
| Maximum no-load displacement (mm p-p) | 0~2 (automatic adjustment) and 0~5 (Ręczna regulacja) | Fali wibracyjne | sine wave |
| Vibration axial direction | pionowy | Excitation mode | electromagnetic excitation |
| Vibration control mode | closed loop control | Data acquisition method | vibration data acquisition instrument + acceleration sensor |
| Acceleration sensor | 1szt (built-in vibration table body) |
GA-7003-A Tester wibracji elektromagnetycznych w pionie
Technical parameters of vibration controller
Przegląd produktów: adopt the international advanced distributed system mechanism system, 32-bit floating point DSP processor, the technical performance of vibration control system will be further improved.
Modular and low noise design technology, independently installed in the control box, USB2.0 and the computer simple connection, based on Windows 8 application software, using adaptive control algorithm control software function is strong.
High control precision, wide dynamic range.
◎ the system has a complete automatic safety testing system to protect the normal use of test equipment and specimens.
◎ pre-experiment: in the boot state, automatically detect the system loop connection status, indicating the connection status.
◎ out-of-tolerance alarm and interruption: the system has automatic out-of-tolerance alarm and interrupt detection automatic protection shutdown
◎ the system records the running curve in real time and saves it automatically.
Controller Menu
