- Opis
- Zapytanie
Opis
Ohm Meter
Brief Introduction
AT2511 is the upgrade version of AT511A, is a resistance meter with high-cost performance and small volume, which can measure 10μΩ – 200kΩ, max reading 5000 dgt.It is quite suitable for resistance measurement under low power conditions or factory inspection and product sorting based on its sorting function.
Ohm Meter
Parametr techniczny
| SPECIFICATIONS | |||
|
AT2511 |
AT511C (discontinued) |
||
| Parametr |
DC resistance |
||
| Basic Accuracy | 0.2% | 0.3% | |
| Zakres pomiaru | 10μΩ~200.0kW | 0.1mW~50.00kW | |
| Signal Source | I – Maks: < 100mama | ||
| Zakres | Automatic and manual with 8 ranges | Automatic and manual with 6 ranges | |
| Prędkość | Powolny: 3 times/second; Szybko: 10 times/second | ||
| Result Display | Pokazywać | ||
| Max Reading | 5000 | ||
| Adjustment | Short-circuit Zero-Adjust for each range | ||
| Comparator | OFF, PASS, HIGH, LOW | None | |
| Beep | OK, NG, OFF | None | |
| Test Lead | 4 terminal shielding(2 check terminal and 2 driving terminal) and external shielding ground section | ||
| Inni | LED display | ||
| Aplikacje | Small diameter coil (headset coil); resistance of sensor;
Resistance test of protective device; ordinary transformer, induktor, silnik, deflection coil winding resistance; all kinds of contact resistance; welding point contact resistance; mental defect detection |
||
| GENERAL FEATURES | |||
| Zasilacz | Napięcie: 198V AC – 240V AC. Częstotliwość: 50Hz. Moc: Max 15VA. Optional 110VAC | ||
| Rozmiar | 220mm (Szerokość)x85mm (Wysokość)x259mm (Głębokość), 2kg | ||
| ORDERING INFORMATION | |||
| Accessory | ATL503: Kelvin test leads
AC power cord |
||
