KDYD-A20 Automatic voltage breakdown tester

Beschrijving

voltage breakdown tester

Product beschrijving

Implementation standard: GB/ T40745-2008 / IEC60851-4:2004; Inspection standard: JB/ T4279.9-2008; Meet the requirements of GB/T6109-2008 standard; Used to test the breakdown voltage performance of enamelled round wire and enamelled flat wire with nominal conductor diameter 0.018mm and above at room temperature;

With 20V/S, 100V/S, 500V/S three boost speed, boost speed error is ±10%; The following test methods can be carried out: Round rod method: enamelled round wire with a diameter of 0.100mm and below; Twist method: the diameter of 0.100mm and above 2.500mm and below enamelled round wire, steel ball method: winding flat wire and diameter 2.500mm and above round wire; Can also be used for electrical products and instruments withstand pressure test; A group (5) of samples can be installed at a time, and the breakdown or voltage withstand test of any sample can be completed one by one or separately according to the selected test;

Equipped with RDS-50 hot voltage tester, it can perform hot breakdown voltage test. LED automatic display test results, automatic return; When the sample is broken down, the breakdown voltage display value is automatically locked and does not beat, and the display is kept for 2-10 seconden (verstelbaar), so that the test results are clearly recognizable; Equipped with round rod method, twisting method test fixture and test weight; Equipped with steel ball method test device (steel ball user);

The test chamber door has a safety interlock device, and the safety measures comply with the relevant provisions of high pressure test equipment;