GA-1014 Vulkaniseermachine voor kleine platen

Beschrijving

Vulcaniseermachine voor kleine platen

Overzicht

This series of plate vulcanizing machine is used for pressing all kinds of rubber model products and non-model products, and also can be used for pressing all kinds of thermosetting plastics and foaming rubber and plastic products.With independent power mechanism and electrical system, using the button control.Working pressure and heating temperature can be adjusted within a certain range.This machine is divided into two types: manual and semi-automatic

Vulcaniseermachine voor kleine platen

Toepassingsindustrie

Laboratory small plate vulcanizing machine is also called hot press molding machine, mainly used for rubber, plastic products sample making experiments, zoals: tensile test, impact test, compression test sample preparation.

Plastic industry: laboratory sample making, small batch trial production, research and development,PPT,Pe,PVC and so on.

Rubber industry: laboratory sample making, small batch trial production, research and development, natural rubber, silicone, silicone rubber, enz.

Vulcaniseermachine voor kleine platen

technische parameters

1, capacity: 5-30ton adjustable [with automatic exhaust function]

2, temperatuur bereik: normal temperature ~ 300℃

3, temperature accuracy: ±1.5℃

3, Temperature controller: PLC touch screen

4, temperature control mode: PLC touch screen

5, heater: electric heat pipe heating

6, Werkmodus: electric heating.Heating mode: electric heating.

7, heating time: room temperature ~ 160℃ about 15min

8, timer: PLC display, 0.01s ~ 999min ~ 999hr (verstelbaar)

9, two layer hot pressing plate: 350×350mm (high hardness steel plate with special treatment) electric heating.

10, exhaust function: low pressure automatic exhaust a minute 3 ~ 10 times adjustable

11, hydraulic system: proportional hydraulic flow closed loop control system, GPY oil pump (Japanese) drive high performance electric hydraulic with high precision of the resistance of cylinder piston implementation such as speed control mode (travel height can be set in a single freedom) with automatic pressure compensation function, pressure time can be preset, load power, steady lifting, automatic pressure, pressure, pressure relief

12, cylinder stroke: Max 300mm

13, cylinder speed: 11mm/sec

14, pressure gauge: 0 ~ 200kg/sq.cm

15, volume :(B×D×H)1600×650×1560 mm

16. Power source: 3∮, AC380V, 15A

17, gewicht: about 720kg