ISO 1461-2022 “Hot Dip gegalvaniseerde coatings op staalproducten – Specificaties en testmethoden”
Invoering
ISO (Internationale Organisatie voor Standaardisatie) is een wereldwijde federatie van nationale normeninstanties (ISO-lidorganisaties). De ontwikkeling van internationale normen wordt doorgaans uitgevoerd via technische ISO-commissies. Each member group interested in a subject on which a technical committee has been established has the right to be represented on the committee. Internationale organisaties, governments and non-governmental organizations that liaise with ISO are also involved in this work. ISO werkt nauw samen met de Internationale Elektrotechnische Commissie (IEC) over alle kwesties van elektrische standaardisatie.
ISO/IEC Directive Part 1 describes the procedures used to develop this document as well as those used for further maintenance. In het bijzonder, attention should be paid to the different approval criteria required for different types of ISO files. This document has been drafted in accordance with the editorial rules of ISO/IEC Directive Part 2 (zie iso.org/directives).
Please note that some elements of this document may be the subject of patent rights. ISO is niet verantwoordelijk voor het identificeren van een of meer van dergelijke octrooirechten. Details of any patent rights identified during the development of the document will be in the profile and/or in the list of ISO patent declarations received (zie iso.org/patents).
Any trade names used in this document are provided as information for the convenience of the user and do not constitute an endorsement thereof.
ISO 1461-2022 “Hot Dip gegalvaniseerde coatings op staalproducten – Specificaties en testmethoden”
Verklaringen van de relevante normen van vrijwillige, ISO -specifieke termen gerelateerd aan conformiteitsbeoordeling en de uitdrukking van betekenis, en de ISO in de technische belemmeringen om te handelen (TBT) zich houden aan het principe van de Wereldhandelsorganisatie (WTO) informatie, zie iso.org/iso/foreword.html.
Dit document is opgesteld door het technische comité ISO/TC 107, Metallic en andere anorganische coatings, Subcomité SC 4, Hot Dip Coatings (galvanization, enz.) In samenwerking met het technische comité CEN/TC 262 van het Europees Comité voor standaardisatie (Cen) on metallic and other inorganic Coatings, According to the technical cooperation agreement between ISO and CEN (Wenenovereenkomst).
The fourth edition cancelates and replaces the third edition (ISO 1461:2009), die technisch is herzien.
ISO 1461-2022 “Hot Dip gegalvaniseerde coatings op staalproducten – Specificaties en testmethoden”
De belangrijkste veranderingen zijn als volgt:
— Definities toegevoegd van “het verzinken”, “na de behandeling”, “extra coating”, “natte opslagvlek” En “Dubbel fasesysteem” in hoofdstuk 3;
-The difficulty of removing flux residues and zinc ash when restricted access is recognized in 6.1;
– The reference area selection procedure has been clarified and additional requirements have been added in 6.2.3 Om het gebruik van referentiegebieden op bepaalde kleine hulpcomponenten op grotere items te voorkomen;
— Modified refurbishment requirements for uncoated areas: removed the requirement for zinc-containing paint pigments to comply with ISO 3549; Annex C has been extended to include additional information on the applicability of the different refurbishment methods given in 6.3;
— Alle vereisten met betrekking tot de dikte van de coating, inclusief tafels 3 En 4, zijn geplaatst in 6.5, including requirements related to the dimensions of items previously in the control sample in 6.2.3; The new requirements for these steels in 6.5 recognize the lower coating thickness that results in ultra-low reactivity steels;
– Updated corrosion resistance information for galvanized coatings, inclusief langetermijncorrosieweerstand in verwijzing naar ISO 9224 In bijlage E.
ISO 1461-2022 “Hot Dip gegalvaniseerde coatings op staalproducten – Specificaties en testmethoden”
Any feedback or questions regarding this document should be referred to the user’s national standards body. A full list of these institutions can be found at iso.org/members.html.
1 Toepassingsgebied
This document specifies the general properties of hot dip galvanized coatings and test methods for hot dip galvanized coatings applied by immersing steel products (inclusief bepaalde gietstukken) in a zinc melt (containing no more than 2% of other metals). Dit document is niet van toepassing op:
A) Continu Hot Dip Gegalvaniseerd blad, draad en gevlochten of gelaste mesh -producten;
B) hot-dip galvanized pipes in automation equipment;
C) hot dip galvanized products (zoals bevestigingsmiddelen) for which specific standards exist and may include additional requirements or requirements different from those in this document.
Opmerking: Individual product standards can be incorporated into this document by referring to the number of galvanized coatings, of ze kunnen worden gecombineerd met productspecifieke wijzigingen. Different requirements can also be made for galvanized coatings on products designed to meet specific regulatory requirements.
ISO 1461-2022 “Hot Dip gegalvaniseerde coatings op staalproducten – Specificaties en testmethoden”
Dit document is niet van toepassing op post-behandeling of extra coating van hot dip galvaniseerde producten.
2 Normatieve referentiedocumenten
Wanneer de volgende documenten in de tekst worden verwezen, part or all of them constitute the requirements of this document. Voor gedateerde referenties, the citation-only version applies. Voor ongedateerde citaten, the new version of the cited document (inclusief eventuele herzieningen) is van toepassing.
ISO 752, zinc ingot
ISO 1460, Metalen coatings — hot dip galvanized coatings on ferrous metallic materials — gravimetric determination of mass per unit area
ISO 2064, Metallic en andere anorganische coatings – Definities en conventies voor diktemeting
ISO 2178, Niet-magnetische coatings op magnetische substraten – Meting van de coatingdikte – magnetische methode
ISO 2859-1, Sampling procedures for inspection by property – Deel 1: Sampling scheme for the acceptance quality limit (Intelligentie) index for batch inspection
ISO 2859-2, Sampling procedures for testing by property – Deel 2: Bemonsteringsplannen geïndexeerd door beperkte kwaliteit (Lq) for testing of isolated batches
ISO 2859-3, sampling procedures for testing by property – Deel 3: Sampling procedures for skipping batches
ISO 10474, Steel and steel products – inspection documents
ISO 14713-2:2019, Zinkcoatings — Guidelines and recommendations for corrosion protection of steel in structured-part 2: Hete dip galvaniseren
IN 1179, Zink- en zinklegeringen — primary zinc
IN 13283, Zink- en zinklegeringen — Gerecycled zink
ISO 1461-2022 “Hot Dip gegalvaniseerde coatings op staalproducten – Specificaties en testmethoden”
3 termen en definities
Voor de doeleinden van dit document, de termen en definities gegeven in ISO 2064 and below apply.
ISO and IEC maintain terminology databases for standardization at:
– ISO online browserplatform: iso.org/obp
– IEC Electropedia: verkrijgbaar op electropedia.org
3.1 Hete dip galvaniseren
To form a galvanized coating of zinc or zinc-iron alloys or both on fabricated iron or steel products by immersion of a zinc melt (3.16)
3.2 Hete dip gegalvaniseerde coating
Gegalvaniseerde coating
De coating verkregen door intermitterende hete dip galvaniseren (3.1)
3.3 Elektroplatiemachine
Hot dip galvanized (3.1) batch steel products company or organization
3.4 Galvanized layer
Totale massa zink- of zinklegering per oppervlakte, of beide
Opmerking 1: De kwaliteit van gegalvaniseerde coating wordt uitgedrukt in gram per vierkante meter, g/m 2.
3.5 Thickness of galvanized layer
Total thickness of zinc or zinc alloy, of beide
Opmerking 1: The thickness is expressed in micrometer µm.
ISO 1461-2022 “Hot Dip gegalvaniseerde coatings op staalproducten – Specificaties en testmethoden”
3.6 Salient surface
A portion of an article that is or will be covered by a galvanized coating and that is required for the use of performance or appearance or both
3.7 Controlemonsters
Select items or groups of items from the batch for sampling
3.8 Referentiegebied
An area where a specific number of single measurements are made
3.9 Dikte van lokale gegalvaniseerde laag
The average galvanized coating thickness (3.5) is a single value from a magnetic test or a weight test obtained from a specific number of measurements within the reference area (3.8)
3.10 Gemiddelde gegalvaniseerde laagdikte
Average thickness of local galvanized coating (3.9)
3.11 Lokale galvaniserende laag
Galvanized layer quality value obtained from a single weight test (3.4)
3.12 Gemiddelde gegalvaniseerde coatingkwaliteit
Gemiddelde gegalvaniseerde coatingkwaliteit (3.4) bepaald door een controlemonster te gebruiken (3.7) of door conversie van de gemiddelde gegalvaniseerde coatingdikte (3.10)
Invoer Opmerking 1: Control samples should be selected according to Chapter 5 using tests conforming to ISO 1460.
ISO 1461-2022 “Hot Dip gegalvaniseerde coatings op staalproducten – Specificaties en testmethoden”
3.13 Inspectiebatch
Enkele bestelling of enkele leveringsbelasting
3.14 Aanvaarding
Inspectiebatch (3.13) at hot dip galvanizing (3.1) factory unless otherwise specified
3.15 Ongecoat gebied
The area of a steel product that does not react with molten zinc
3.16 Zinksmelt
A molten substance containing chiefly zinc
3.17 Laslekkage
Discharge the previously reserved pretreatment solution from a narrow space between two closely contacting surfaces of intermittent welding or from a very small cavity (pinhole) In de las van een gegalvaniseerd product
3.18 Na behandeling
Onmiddellijke toepassing van chemische of andere behandelingen die een tijdelijk effect hebben, zoals het remmen van natte opslagvlekken (3.20) of het uiterlijk van gegalvaniseerde producten verbeteren
3.19 Extra coating
Application of galvanized post-coating as part of a duplex system (3.21), such as liquid coating or powder coating
ISO 1461-2022 “Hot Dip gegalvaniseerde coatings op staalproducten – Specificaties en testmethoden”
3.20 Natte opslag van vlekken
Oppervlaktebanden veroorzaakt door de vorming van zinkcorrosieproducten, meestal zinkhydroxide en zinkoxide, when newly galvanized steel is stored or transported under wet or damp conditions
3.21 Duplex systems
Hete dip gegalvaniseerde coating (3.2) met extra vloeistofcoating of poedercoating
Only the standard information part is publicly available. Om de volledige inhoud te zien, you’ll need to buy the standard through a formal channel.