XRY-II Heat Storage Coefficient Apparatus

Gambaran keseluruhan

The instrument can measure the heat storage coefficient, kekonduksian terma, temperature conductivity and specific heat of materials in different wet states at the same time in a test, the device is simple, ketepatan yang tinggi, and the test speed is fast (about ten minutes for a test). JGJT 12-2019 (instead of JGJ 51-2002) (Technical Specification for lightweight Aggregate Concrete) and Appendix B of JG/T283-2010 “Expansive Vitrified microbead Light Mortar” for determination of heat storage coefficient.

The main technical performance

1. Skop permohonan:

This instrument is suitable for measuring the thermal conductivity, heat storage coefficient, temperature conductivity and specific heat of the homogeneous plate, colloidal, powder and granular materials under dry or different moisture conditions. The heat storage coefficient of the measured material ranges from 0.1-30W/M2K, and the thermal conductivity of the measured material ranges from 0.035 to 1.7w/m.k.

2, saiz sampel: a thin specimen 20×20× (1.5 ~ 3) cm

Two thick specimens 20×20× (4 ~ 10) cm

3, power source ~ 220V, 50HZ

4, overall size (length × width × height) 600×440×600 (mm)

5. Keadaan kerja

① Ambient temperature 10 ~ 35℃ ② Relative humidity ≤80%

③ The room temperature should be stable ≤±1.5℃

6, the accuracy of the measurement results is ±5%

7. Connect the host computer to realize automatic computer testing and data printing output.