WEW-600B Digital Hydraulic Universal Testing Machine
- Penerangan
- Siasatan
Penerangan
Mesin Ujian Universal
1.pengenalan
The main engine is two columns, two bars, oil cylinder, and the stretch space is above the host, and the compression and bending test space is between the lower beam of the host and the table.The measuring instrument adopts high definition LCD display, the experimental data is convenient and intuitive.
Transmission system
The lower beam can be adjusted by using the motor driven by the reducer, the chain drive mechanism and the screw side drive, and realize the adjustment of the drawing and compression space.
Mesin Ujian Universal
3,The hydraulic system
The hydraulic oil in the oil tank pumps the high-pressure pump into the oil circuit through the motor, which flows through the high pressure filter and sends back the oil valve and enters the cylinder.The measuring instrument collects and analyzes the data through the sensor, and shows the constant force value. The tester realizes the speed of the test force by controlling the flow through the oil delivery valve.
4.The force measurement and control system
l support for tensile, compression, shear and bending test;
l manually adjust back to the oil valve, concise and flexible operation;
l support custom test parameters;
l electronic load, the liquid crystal display test force peak time curve, ujian, test forces, has obvious yield properties of the material yield strength;
l convenient query results;
There is a microtyping machine.
5.Main performance technical indicators
| Max test force（kN） | 600 |
| Max Test range（kN） | 4%-100% |
| Relative error of test force indicator | ＜ showing value±1% |
| Test force resolution | Max load 1/300000 |
| Relative error of deformation indicator. | ＜ showing value ±1% |
| Deformation resolution | Maximum deformation1/300000 |
| Maximum tensile test space.（mm） | 600 |
| Compression space（mm） | 500 |
| The piston stroke(mm) | 200 |
| Column spacing（mm） | 450 |
| The maximum clamping range of the round sample.（mm） | Φ6-Φ40 |
| Flat sample holder thickness（mm） | 0-30 |
| The maximum clamping width of flat sample.（mm） | 75 |
| The pressure plate size（mm） | Φ160 |
| The clamping way | Hydraulic clamping |
| The maximum distance between two points of bending fulcrum.（mm） | 300 |
| Bending roll width.（mm） | 140 |
| Main frame size（mm） | 750*600*2250 |
| Oil source console size（mm） | 1100*750*1000 |
| Total motor power（kW） | 2 |
| The total weight（kg） | 1900 |
