VDT-T10 Electrostatic Discharge Tester
- Penerangan
- Siasatan
Penerangan
VDT-T10 Electrostatic Discharge Tester
Penerangan Produk
Voltage sags, short interruptions are caused by sudden changes in power grid, power facility failures or loads. In some cases there will be two or more consecutive rollovers or interrupts. The voltage change is caused by a continuous change in the load connected to the grid. If the EUT on the power supply voltage changes cannot respond in a timely manner, it may lead to failure. The voltage drop generator is used to evaluate the performance of electrical and electronic equipment when subjected to voltage sags, short interruptions, and voltage changes. Products fully meet the latest requirements of IEC/ EN 61000-4-11.
VDT-T10 Electrostatic Discharge Tester
ciri-ciri
- Fully Compliant with latest Standards IEC/ EN 61000-4-11
- Paparan Panel Sentuh 7” mesra pengguna
- Menyokong pelbagai bahasa & memudahkan pengguna
- Program ujian kendiri persekitaran terbina dalam
- Operasi boleh atur cara
- Pre-programmed IEC 61000-4-11 test settings
- Antara muka RS232, Operasi kawalan PC & printable test report
- Penggunaan yang selesa dan operasi yang mudah
VDT-T10 Electrostatic Discharge Tester
Technical data
| Model | VDT T10 |
|
Voltage variation range |
0~120% |
| Voltage change duration | 1~ 9999 half cycle |
| Switching phase | 0~ 359° segerak, tak segerak, atau automatik |
| Built-in standard test grade | 0, 40%, 70%, 80% |
| Jump time | 1μs~ 5μs |
| Voltage changes in the number of repeat | 1~ 9999 |
| Interval cycle of voltage variation | 1~ 9999 half cycle |
| Drop mode | Set at random |
| EUT capacity | Three phase, 10A |
| Bekalan kuasa | AC220V 50/60Hz |
| Suhu persekitaran | 15℃~ 35℃ |
