GA-7003-A Electromagneticvertical vibration tester

Penerangan

GA-7003-A Electromagneticvertical vibration tester

1.pengenalan

Gambaran Keseluruhan Produk: electromagnetic vibration test series are widely applicable to national defense, aeroangkasa, communications, electronics and automobiles

Home appliances and other industries.This type of equipment is used to detect early faults, simulate actual working condition assessment and structural strength test. The product has a wide range of applications, a wide range of applications, remarkable test results and reliability.

◎ it has constant vibration amplitude and constant acceleration vibration

◎ the system is equipped with a high-precision vibration sensor to collect the acceleration, amplitude and frequency in real time

GA-7003-A Electromagneticvertical vibration tester

2.Parameter teknikal

Frequency modulation range (Hz	5~500	Sweep frequency range (Hz)	5~500
Maximum acceleration (m/s2)	170	Maximum test load (kg)	20
Maximum no-load displacement (mm p-p)	0~2 (pelarasan automatik) and 0~5 (manual adjustment)	Vibration waveform	sine wave
Vibration axial direction	menegak	Excitation mode	electromagnetic excitation
Vibration control mode	closed loop control	Data acquisition method	vibration data acquisition instrument + acceleration sensor
Acceleration sensor	1pcs (built-in vibration table body)

GA-7003-A Electromagneticvertical vibration tester

Technical parameters of vibration controller

Gambaran Keseluruhan Produk: adopt the international advanced distributed system mechanism system, 32-bit floating point DSP processor, the technical performance of vibration control system will be further improved.

Modular and low noise design technology, independently installed in the control box, USB2.0 and the computer simple connection, based on Windows 8 application software, using adaptive control algorithm control software function is strong.

High control precision, julat dinamik yang luas.

◎ the system has a complete automatic safety testing system to protect the normal use of test equipment and specimens.

◎ pre-experiment: in the boot state, automatically detect the system loop connection status, indicating the connection status.

◎ out-of-tolerance alarm and interruption: the system has automatic out-of-tolerance alarm and interrupt detection automatic protection shutdown

◎ the system records the running curve in real time and saves it automatically.

Controller Menu