Ruang Kelembapan Suhu Pintu GA-2001-B
- Penerangan
- Siasatan
Penerangan
Ruang Kelembapan Suhu Pintu GA-2001-B
1.Spesifikasi
| Model | GA-2001-B |
| Up inner size | W400*H500*D400mm |
| Down inner size | W400*H500*D400mm |
| Saiz luar | W1000*H1720*D1500mm |
| Kadar suhu | 0℃~150℃ |
| Humidity range | 20%~98%RH. |
| Inner material | SUS304 stainless steel |
| Out material | SUS304
Stainless steel or electrostatic spray painting |
| Cool system | French TECUMSEH double stage compressor |
| refrigerating fluid | R404a and R23(DUPONT) |
| Cara penyejukan | Air cooled |
| Pengawal | Independently developed 7 inch full-color touch screen controller |
| Kadar pemanasan | 2.0℃~4.0℃/min nonlinear |
| Cooling rate | 0.7℃~1.0℃/min nonlinear |
| Aksesori | 50mm connection hole *1 ditetapkan, wet gauze *1 ditetapkan, 4GB usb disk (with operation video)*1 ditetapkan, manual warranty card *1 ditetapkan, and rack *2 kepingan |
| Berat badan(kg) | 500 |
| Kuasa | 380V3phase |
| Rate of (kw) | 6 |
| semasa(A) | 15 |
Ruang Kelembapan Suhu Pintu GA-2001-B
2.Spesifikasi teknikal
| 1. Penggunaan peralatan | Equipment for testing the properties of materials in various environments and testing the heat, cold, dry and moisture resistance of various materials.It is suitable for testing quality of electronic, elektrik, mobile phone, communication, alat, vehicle, plastic products, logam, makanan, chemistry, building materials, medical and aerospace products. |
| 2. Test sample | This test equipment is prohibited:
Test or storage of samples of inflammable, explosive and volatile substances or of samples of stored corrosive substances or of stored biological samples or of samples of strong electromagnetic emission sources. |
| Equipment for testing the properties of materials in various environments and testing the heat
3. Performance |
|
| 3.1. Test environmental conditions
3.2. Kaedah ujian |
Environment temperature is 25 ℃, relative humidity of 85% or less, test under the condition of no sample in the box
GB/T 5170.2 Temperature testing equipment GB/T 5170.5 Wet and hot test equipment (wet and hot only) |
| 3.3. Temperature fluctuations | ±0.5℃ |
| 3.4. Temperature deviation | ±2.0℃ |
| 3.5. Humidity fluctuations | ±2.5%R.H. |
| 3.6. Humidity deviation | ±3.0%. |
| 3.7. memuatkan | The test space is no more than three quarters of the total space, no heating source。 |
| Meet the test standards
|
GJB 150.3 High temperature test
GJB 150.4Low temperature test IEC68-2-1 Test A: cold IEC68-2-2 Test B: dry heat GB 11158《High temperature test box technical conditions》 GB10586-1《Technical conditions of wet and hot test box》 GB/T 2423.2《Basic environmental test procedures for electrical and electronic products B: high-temperature test methods》 GB/T 2423.3《Basic environmental test procedures for electrical and electronic products Ca: constant humidity and heat test method》
|
| Ruang Kelembapan Suhu Pintu GA-2001-B
4. Structural features |
|
| 4.1Insulation enclosure structure
|
Exterior wall material: high quality stainless steel 304 or electrostatic spray paint
Inner wall material: high quality stainless steel 304 Box insulation material: flame retardant and fireproof rigid polyurethane foaming Door insulation material: flame retardant and fireproof rigid polyurethane foaming. |
| 4.1. Air conditioning channel | Centrifugal fan:
Heater, evaporator, feed outlet, temperature sensor. |
| Standard configuration of test box | Visual window 280x380x40mm 3 layer vacuum layer;
Explosion-proof incoming handle; Box lighting:5W Pin hole：φ50mm 1pcs; |
| 4.2. Door | Single door opening, left door opening, observation window W280xH380mm, lamp, window frame/door frame anti-condensation electrothermal device; |
| 4.3. The control panel | Controller display, sound and light alarm, running indicator light, power button switch, USB data download interface |
| 4.4. Machine room | Refrigeration unit, water pan, drain hole, dan lain-lain |
| 4.5. Distribution control cabinet | Distribution board, heat dissipation system |
| 4.6. The heater | High temperature insulating ceramic heating wire (fast heating speed, low inertia, dan lain-lain.) |
| 4.7. Heater | Steam humidifying system, through the air duct system circulation mode |
| 4.8. Power line hole and drain hole | It’s behind the device |
