GA-1801-B Roughness Profilometer
- Penerangan
- Siasatan
Penerangan
Roughness Profilometer
Product brief sayantroduction:
Profile roughness tester is a precision measuring instrument which is widely used in machining, kereta, bearing, machine tools, touch tools, precision hardware, optical processing and other industries.The instrument drive box provides high-precision linear reference guide rail with different specifications of 100, 120 dan 150 mm. The sensor moves in a straight line along the guide rail.So we can set up X coordinate measurement units.The differential inductance sensors are used in Z axis from 10 mm to 20mm.The drive box can be adjusted horizontally ±10 degrees by the horizontal adjusting button.And can carry on the horizontal and the vertical direction movement respectively through the control box’s operation key or the software interface.The sample shape can be scaled up to any size.The measurement software under WINDOWS XP operating system is intuitive and convenient to operate.Rich function, ketepatan tinggi, kestabilan yang baik, and easy to print out and save files.
The roughness and contour shape parameters of various precision mechanical parts can be measured.The fitting method can be used to evaluate the radius, Angle treatment, circle treatment, point line treatment, Angle and distance from the center of two circles.Thus, shape parameters such as straightness, convexity, groove center distance, inclination, groove depth, groove width, groove edge distance, vertical distance from groove center distance, horizontal distance and step can be measured.
The performance of the instrument can be compared with that of foreign imported instruments. The instrument has reached the international standard in all aspects. The instrument conforms to the n ational standards GB/ t3505-2000, GB/ t6062-2001, GB/ t10610-1998, and the international standards ISO5436, ISO11562,ISO4287.See technical parameters for detailed indicators.
Roughness Profilometer
Merit:
1.The up and down lifting is automatically controlled, the touch pin will automatically stop when it touches the surface of the workpiece.
2.The roughness measuring stylus is a natural diamond stylus, and the contour measuring stylus is a tungsten steel stylus, which conforms to international standards and makes the measurement more accurate.
3.Integrated sensor, roughness and contour measurement only need to replace the stylus, no need to replace the sensor, mudah untuk digunakan.
4.Electric parts eliminate the separation of components, electrical box and air floating air pump, we use stepping motor, integrated chip control box, more stable.
5.The measurement report can be directly imported into word, CAD and other software.
Roughness Profilometer
Specifications:
| taip | GA-1801-B-5C | GA-1801-B-6C | |
| roughness test: | |||
| measuring parameter | Ra,Rz,Rt,RS,RSm,Rp,Rv,Rmaks,Rq,D,Pt,Lr,Ln and Rmr(Tp)Curve Curve etc. | Ra,Rz,Rt,RS,RSm,Rp,Rv,Rmaks,Rq,Rpk,Rpv,Rk,Mr1,Mr2,D,Pt,Lr,Ln and Rmr (T p) Curve etc. | |
| Roughness profile graphics magnification | 10，20，50，100，200，500，1000，2000，5000，10000，20000，50000，100000，200000，500000 atau automatik | ||
| Roughness measuring range | 0.01 – 30 μm di atas | ||
| Panjang pensampelan | L: 0.08 ,0.25, 0.8, 2.5,8 mm | ||
| Untuk menilai panjang | Ln: 1L, 2L, 3L, 4L, 5L To choose | ||
| Pensampelan penilaian instrumen | 100000 dot | ||
| resolution ratio | 0.001 µm | ||
| indication error | ± (5 %+4nm) | ||
| Measurement repeatability | ± 3 % | ||
| Measure the maximum height of the workpiece | 370mm | ||
| Sensor boleh diukur | Surface roughness of plane, inclined surface, permukaan lubang dalaman, permukaan silinder luar, permukaan alur dalam, circular arc surface, spherical surface, dan lain-lain | ||
| Natural diamond stylus | normalized form, altitude 12mm
altitude 4mm The stylus radius：2µm, Static pressure of the stylus :0.004N Top Angle：60 limit
|
||
| Left and right sliding speed of drive box | 2mm/sec | ||
| Drive box lifting mode |
intelligent design：Up and down automatically rise and fall, the touch needle will automatically stop when it touches the work piece under test
|
||
| movement speed: | 0.25 mm/sec，0.5 mm/sec，1mm/sec | ||
|
linear region |
Vertical 640 satu | ||
| Pt measurement range for steps and scratches | 1mm | ||
| Axial measurement range | 100mm | 120mm
150mm(6CA) |
|
| Garis besar grafik | Contour directly，Filtered profile | ||
| X and Y magnification ratio of contour figure | 1-500 Click to enlarge | ||
| penapis | ISO 2CR filter | ||
| Pinhole measurement range | ≥ 5 mm | ||
| X-Y workbench | Band rotation 360˚
X-Y bed dimension 125*125mm X-Y moving range 25 mm |
||
| Size of bearing inner and outer rings |
Maximum outer diameter of inner ring 350mm Thickness 160mm Minimum aperture of outer ring 15mm |
||
|
Print paper specification
|
A4 Kertas | ||
| sistem pengendalian | Win7 | ||
| Contour measurement range： | |||
| range of measurement： | X：100mm
Z：10mm |
X：120mm or 150mm (JB-6CA)
Z：20mm |
|
| Shape measurement function | element：Point, barisan, top, valley, intersection, kenalan, center line.Analysis: coordinate difference, distance, Angle, radius, contour, dan lain-lain. | ||
| Julat sensor | 1mm(roughness),10mm（outline） | 1mm(roughness)， 20mm（outline） | |
| Shape graphics magnification | 1，2，3，4，5，10，20，50，100，120，150，200，250，300，350，400，450，500 | ||
| Ratio of range to resolution | 65,536:1 | ||
| Axial measurement range | 100mm | 120mm | |
| Radius error | 0.1%-1.0% | ||
| Straightness measurement error | 1μm/40mm | ||
| sample rate | 0.25 mm/sec，0.5 mm/sec，1mm/sec | ||
| Lifting speed | 2mm/second | ||
| Up and down, left and right | X：100mm Z: 370mm | X: 120mm Z: 370mm | |
| The length of the needle | 18mm and 6.5mm | 30mm and 12 mm | |
| Tip radius of stylus | 10μm | ||
| The Angle of the tip of the stylus | Long needle 16 darjah, short needle 30 darjah | ||
| dynamometry | 0.01-0.02N | ||
| Print paper specification | A4 Kertas | ||
| sistem pengendalian | Win7 | ||
| The choose and buy a | Optionally measure the maximum height of the work piece
：500mm |
||
| Aksesori standard, aksesori | Contour roughness meter host, pillar and marble bottom, pengawal, peranti memandu
Sensor, adjustable worktable, Angle adjustment worktable, v-block, fixture, Stylus standard, small hole stylus, contour stylus, roughness sample, contour standard ball Computer printer, Arahan manual |
||
| Instrument power supply | 220 VAC ±10%, 50Hz | ||
| Marble table size | 700mm×400mm×100mm weight ：150kg | ||
| Instrumen dan berat kasar | 200Kg | ||
Roughness Profilometer
