BGD 510 Penguji Lekukan Buchholz

Penerangan

BGD 510Buchholz Indentation Tester

lastic deformable coatings. A beveled disc with a sharp edge is applied onto the test surface under a constant 500g. Test load provided by a steel block holder. The trace left after 30 s. Load is measured with a 20X magnification illuminated microscope. The length of the indentation is inversely proportional to the hardness.

◆ Conform with Standard ISO 2815

◆ Stainless steel block

◆ Circular tool is a double cone block

◆ Circular tool and support of hard metal

◆ Marking triangle for precise positioning.

◆ 20x magnification with graduated scale to measure indentation length.

BGD 510Buchholz Indentation Tester

Parameter Teknikal Utama：
■ Indentation load：500±5g

■ Indentation Diameter：30±0.2mm

■ Indentation Width：5±0.1mm

■ Indentation Angle：60°±0.5°

■ Accuracy of indentation reading：0.1mm
■ Maklumat Pesanan：BGD 510—Penguji Lekukan Buchholz

BGD 510 Penguji Lekukan Buchholz

lastic deformable coatings. A beveled disc with a sharp edge is applied onto the test surface under a constant 500g. Test load provided by a steel block holder. The trace left after 30 s. Load is measured with a 20X magnification illuminated microscope. The length of the indentation is inversely proportional to the hardness.

◆ Conform with Standard ISO 2815

◆ Stainless steel block

◆ Circular tool is a double cone block

◆ Circular tool and support of hard metal

◆ Marking triangle for precise positioning.

◆ 20x magnification with graduated scale to measure indentation length.

BGD 510Buchholz Indentation Tester

Parameter Teknikal Utama：
■ Indentation load：500±5g

■ Indentation Diameter：30±0.2mm

■ Indentation Width：5±0.1mm

■ Indentation Angle：60°±0.5°

■ Accuracy of indentation reading：0.1mm
■ Maklumat Pesanan：BGD 510—Penguji Lekukan Buchholz

BGD 510Buchholz Indentation Tester

lastic deformable coatings. A beveled disc with a sharp edge is applied onto the test surface under a constant 500g. Test load provided by a steel block holder. The trace left after 30 s. Load is measured with a 20X magnification illuminated microscope. The length of the indentation is inversely proportional to the hardness.

◆ Conform with Standard ISO 2815

◆ Stainless steel block

◆ Circular tool is a double cone block

◆ Circular tool and support of hard metal

◆ Marking triangle for precise positioning.

◆ 20x magnification with graduated scale to measure indentation length.

BGD 510Buchholz Indentation Tester

Parameter Teknikal Utama：
■ Indentation load：500±5g

■ Indentation Diameter：30±0.2mm

■ Indentation Width：5±0.1mm

■ Indentation Angle：60°±0.5°

■ Accuracy of indentation reading：0.1mm
■ Maklumat Pesanan：BGD 510—Penguji Lekukan Buchholz