WAW-300B 전기 유압 서보 범용 테스트 머신
- 설명
- 문의
설명
유압 만능재료 시험기
1.피rofile
The main engine is two columns, two bars, oil cylinder, and the stretch space is above the host, and the compression and bending test space is between the lower beam of the host and the table.Measurement and control system using digital multi-channel closed loop control system, with functions of three closed loop, which can make the stress, strain and displacement closed loop control mode, and can make an impact switch, the speed of its stress and strain rate completely accord with national standard GB/T228.1-2010 and other metal tensile test standard requirements.
유압 만능재료 시험기
2.The transmission system
The lower beam can be adjusted by using motor driven by reducer, chain drive mechanism and screw side drive.
유압 만능재료 시험기
3.The hydraulic system
The hydraulic oil in the tank pumps the high-pressure pump into the oil circuit through the motor, which flows through the high pressure filter, the differential valve group, and the servo valve, and enters the cylinder.The computer sends out the control signal to the servo valve, controls the opening and direction of the servo valve, so as to control the flow into the cylinder, so as to achieve the control of equal speed test force and equal velocity displacement and so on.
4.제어 시스템
l support for tensile, 압축, shear and bending test;
l support open editor test, editorial standards and steps, and to support export import test, standard and procedure;
l support custom test parameters;
l adopt open EXCEL form, support user-defined report format;
l convenient check print test results and support to print multiple sample, custom sorting printing projects;
유압 만능재료 시험기
Safety device
When more than 3% of the maximum test force test force, 과부하 보호, stop the oil pump motor.
Rises when the piston reaches the limit position, 제한 보호, stop the oil pump motor.
When fell to set beam position, 제한 보호, deceleration machine downtime.
Main technical performance indicators
| Max force（kN） | 300 |
| Measure Force Range | 2%-100% |
| Test force relative error value | ＜ The value for ±1% |
| Test force resolution | Max load 1/300000 |
| Deformation relative error value | ＜ The value for ±1% |
| Deformation of the resolution | The biggest deformation 1/300000 |
| The largest tensile test space（mm） | 600 |
| Compression space（mm） | 500 |
| The piston stroke(mm) | 200 |
| Column spacing（mm） | 455 |
| Circular specimen clamping range（mm） | Φ6-Φ26 |
| The specimen thickness clamping（mm） | 0-15 |
| Flat specimen clamping width（mm） | 70 |
| The pressure plate size（mm） | φ160mm |
| Bend the fulcrum maximum distance between two points（mm） | 400 |
| Bending roll width（mm） | 140 |
| The clamping way | Hydraulic clamping |
| The host dimension（mm） | 750*600*2050 |
| The oil source console size（mm） | 1100*750*1000 |
| Motor total power（kW） | 2 |
| Weight（kg） | 1630 |
The factory standard configuration list
| Host Machine | Under the two columns, two screw, cylinder type | 1세트 |
| 로드셀 | 300KN | 1PC |
| Servo control oil source | Proprietary technology | 1세트 |
| Software control system | Including software, displacement sensor | 1세트 |
| Electrical control system | Proprietary technology | 1세트 |
| Round specimen tensile assistive devices | Φ6-Φ13,Φ13-Φ26,Φ26-Φ40 | Each 1 세트 |
| Flat Tensile Accessories | 0-15mm,15-30mm | 1세트 |
| Compression accessories | φ160mm | 1세트 |
| The description, certificate, packing list | ———– | 1세트 |
