- 설명
- 문의
설명
테이버 마모 시험기
테스트 표준
ASTM D4060/D4157/D1044, ISO 7784,JIS K5400/K7024, CNS 8540, BS EN 660-2
테이버 마모 시험기
용도
This machine is used to do the test of wear-resistant in surface, 가죽, 옷감, 페인트, 종이, 바닥, 합판, glass and natural rubber,concrete and ceramics. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased. Remove the specimen after rotation to reach a centain number, and then observe the condition of the specimen or compare the weight with the previous materials.
테이버 마모 시험기
명세서
| Specimen dimension | φ110mm φ6mm |
| Grinding wheel | φ2″（MAX .45mm）1/2″(여) |
| Center space of wheel | 63.5mm |
| Distance between wheel and test plate | 37~38mm |
| Rotating speed | 60rpm 72rpm |
| 짐 | 250g，500g，750g，1000g |
| 시간제 노동자 | LCD,0~999999 |
| Distance between sample and dust collector | 3mm |
| 치수 | 53×32×31cm
|
| 무게 | 18킬로그램， Excluding dust collector |
| 힘 | 1∮,AC220V,50HZ |
| 부속품 | Imported grinding wheel 1 pair |
테이버 마모 시험기
테스트 표준
ASTM D4060/D4157/D1044, ISO 7784,JIS K5400/K7024, CNS 8540, BS EN 660-2
용도
This machine is used to do the test of wear-resistant in surface, 가죽, 옷감, 페인트, 종이, 바닥, 합판, glass and natural rubber,concrete and ceramics. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased. Remove the specimen after rotation to reach a centain number, and then observe the condition of the specimen or compare the weight with the previous materials.
명세서
| Specimen dimension | φ110mm φ6mm |
| Grinding wheel | φ2″（MAX .45mm）1/2″(여) |
| Center space of wheel | 63.5mm |
| Distance between wheel and test plate | 37~38mm |
| Rotating speed | 60rpm 72rpm |
| 짐 | 250g，500g，750g，1000g |
| 시간제 노동자 | LCD,0~999999 |
| Distance between sample and dust collector | 3mm |
| 치수 | 53×32×31cm
|
| 무게 | 18킬로그램， Excluding dust collector |
| 힘 | 1∮,AC220V,50HZ |
| 부속품 | Imported grinding wheel 1 pair |
