SciAps Z-902C LIBS XRF spectrometer analyzer

설명

LIBS XRF spectrometer analyzer

1.특성
SCIAPS Z 시리즈 핸드 헬드 분광계는 탄소강 및 스테인레스 스틸의 탄소 함량을 분석 할 수있는 세계 핸드 헬드 분석기입니다.. 레이저 유도 분해 분광학 (HH-LIBS) 파장이있는 레이저를 맥박하는 데 사용됩니다 1064 나노 미터 및 주파수 50 헤르츠, 레이저 파워 5 맥박 당 millijoules. 내장 분광계, 분석 스펙트럼 범위 :190 nm -670 nm. 내장 아르곤을 사용하십시오. 최소 0.008% C를 감지 할 수 있습니다. Z 시리즈의 장점은 다음과 같습니다:
(1) 작고 가벼운 무게
SCIAPS 핸드 헬드 LIBS 분석기의 무게는 약 2kg입니다, 크기 (길이 * 너비 * 키) 273*73*12mm, 현재 시장에서 유일한 것은 합금 강철 탄소강의 탄소 함량을 측정하고 탄소 등가를 자동으로 계산할 수 있습니다., 금속 등급 핸드 헬드 스펙트럼 분석기를 식별하는 동안, 현장 검사를위한 이상적인 분석 도구입니다.
(2) 사용하기 쉽고 노동 저축
1. 대칭 디자인, 사용자가 악기의 균형을보다 쉽게 ​​균형을 잡을 수 있도록 도와줍니다, 에너지를 절약하다.
2. 핸들 부분은 작습니다, 그리고 손바닥 호랑이 입의 모양을 맞추는 간소화 된 디자인 개념은 비교적 작은 손을 가진 여성 사용자조차도 악기를 들고있을 때 매우 편안한 경험을 갖습니다..
3. 바닥의 ​​사각형 디자인 개념은 악기를 테이블에 쉽고 안전하게 서게합니다., 사용자가 악기를 잡고 샘플에 의해 손가락이 다 치지 않도록 쉽게.
4. 악기의 바닥과 본체의 꼬리는 직선에 있습니다.. 작은 샘플을 측정 할 때, 기기 테스트 창이 직접 대면 할 수 있습니다, 그리고 샘플은 테스트를 위해 테스트 창에 직접 배치 할 수 있습니다..
(3) 튼튼한
Sciaps Libs의 창은 사파이어입니다, 고강도, 불규칙한 샘플이나 날카로운 샘플로 인해 창이 손상되는 것을 효과적으로 방지합니다., 기기 내부의 귀중한 구성 요소에 손상이 발생합니다.
(4) 방사선없이 안전합니다
SCIAPS 레이저 유도 파괴 스펙트럼 분석기는 LIBS라고합니다., 레이저 기술 샘플링, 기기 안전 수준 1, 샘플 테스트를 직접 직접 고정 할 수 있습니다, 안전 사용에 대해 걱정하지 않고; 방사선 도구 라이센스를 신청하고 주민이 주최하는 연간 교육 및 연간 감사에 참석하기 위해 시간과 돈을 쓸 필요가 없습니다.’ 위원회.
(5) 취약하고 비싼 소모품이 없습니다
XRF에 비해, Sciaps에는 취약하고 비싼 소모품이 없습니다. 높은 애프터 서비스 비용에 대해 걱정할 필요가 없습니다.
(6) 요소 특성 신호를 보호하기 위해 고순도 아르곤 가스 병 사용
아르곤 보호는 요소의 특징 스펙트럼 강도를 만듭니다. 10 공기보다 더 강한 시간, 원칙적으로 우리의 장비는 자외선 영역에서 특징적인 광 파장과 낮은 함량 원소의 요소를 분석 할 수 있도록합니다..
(7) Test stroke adjustable technology (SciAps patent), with the following analytical advantages:
1. Minimize the impact of uneven sample quality on test results
With a single beam diameter of 50μm, SciAps has developed an analytical technology with adjustable test travel (SciAps patented technology) to minimize the impact of uneven sample quality on test results, with a maximum travel of 16*16 테스트 포인트.
2. It can analyze ultra-small samples and ultra-thin samples that are not well analyzed by other techniques
The minimum stroke is 1 point, the diameter of a single laser is 50μm, the ablation depth is 10μm, and the theoretical minimum can be measured with a diameter greater than 50μm, a thickness greater than 10μm of small samples and the element composition of the sample coating.
3. Support the drawing of two-dimensional impurity elements respectively, widely used in new material research and development and failure analysis
(8) Leading noise removal technology
Low frequency 50HZ pulse laser combined with detector signal delay acquisition technology, minimize background noise light collection, improve signal purity, combined with high-purity argon to maximize protection of characteristic spectral signals, improve the analysis sensitivity of low content elements; Right photo:
파란색: Spectrum without argon and without delay
Yellow: 아르곤, spectrum during delayed acquisition
(9) Technology leading analysis, high efficiency and low cost excellent analysis
1. Advanced technology ensures accurate results
SciAps LIBS test technology has been approved by API 578 and ASTM, among others.
2. Faster detection speed greatly improves work efficiency and lower analysis cost
The evaluation report of a well-known multinational testing company shows that the cost of purchasing our equipment in the later stage is about 10% of the cost of the current testing equipment, and the detection speed is improved.

(10) 간단한 작동
1. Android operating system:
All SciAps LIBS instruments run the familiar Android operating system combined with SciAps’ simple and intuitive user interface, making operation of the instruments very simple. Connect to your computer and printer via Bluetooth or wirelessly to share and print test results:
Data export via USB flash drive, Wireless LAN or Bluetooth is simple.
Touch displays are clear, bright and readable in all light conditions.
With standard HD camera; Aim for welds or other small samples.
Simple report production and archiving operations with excellent traceability to the test site.
2. One-button spectrometer drift correction function
The startup calibration procedure is standardized, and the sample can be tested according to the software prompt
3. One-click analysis mode
The analysis software is similar to the analysis software of spark direct reading spectrometer, the interface is simple and easy to operate.
4. Remote operation
Android operating system, optional remote operation application, through the PC or mobile phone control instrument, to help customers timely solve software failures and establish a new analysis model, so that efficient real-time service is possible.
(11) Global connectivity
Connectivity packages provide revolutionary data and report sharing capabilities
Global real-time data sharing
SciAps LIBS runs Android. With real-time synchronization, the analyzer can immediately send each test result to any designated computer with Internet access in the world. For exploration, this means that field analysis data or drilling rig core data can be shared and backed up to headquarters in real time from any remote location. Remote real-time monitoring of test data and test quality has a profound impact on quality control and decision efficiency. Verify proper analyzer operation and calibration checks. No more wasting time manually exporting and downloading data.
Data sharing
Run X or Z on any Bluetooth-enabled tablet or smartphone. Share the results instantly to your phone and send them anywhere by email.
Data printing
Send test data or test reports to the Bluetooth printer via Bluetooth, and export data no longer depends on the data cable.
(12) Configure profile builder to allow customizable databases and analysis models;
(13) The ore analysis model has been developed to support the analysis of powder or solid rock ore samples;
(14) A full-element analysis model was developed to support one-key analysis of all elements in the range of 190 nm-625 nm with characteristic light wavelength in the sample;
(15) Adopt the Android system and support the sharing of real-time test results through the network, Bluetooth and other means.

LIBS XRF spectrometer analyzer

2. Z series analyzer software features
(1) A wide range of analytical elements
Can analyze light elements that cannot be analyzed by other handheld analysis techniques
It can also analyze other elements that are difficult to analyze with handheld analysis techniques.
It can also analyze other elements that can be analyzed by handheld analysis techniques.
(2) Advantages of sample types
Customers can purchase current analysis software for different materials or analysis according to their own analysis purposes, ~와 같은:
Aluminum base: BE, 마그네슘, 알, 그리고, 의, V, Cr, 망, 철, ~ 안에, 구리, 아연, Zr, 납, 비, Ag, Sn
Titanium base: 알, 의, V, Cr, 철, 구리, Zr, NB, 모, Sn
Low alloy steel: 씨, 알, 그리고, 의, V, Cr, 망, 철, 구리, ~ 안에, NB, 모, 납
스테인레스 스틸: 씨, 알, 그리고, 의, V, Cr, 망, ~ 안에, 철, ~ 안에, 구리, NB, 모, 여
Nickel base: 알, 그리고, 의, Cr, 망, 철, 공동, ~ 안에, 구리, NB, 모, 여
Copper base: BE, 알, 그리고, Cr, 망, 철, ~ 안에, 구리, 아연, Ag, Sn, 납, 비
Cobalt base: 알, 그리고, 의, Cr, 망, 철, 공동, ~ 안에, 구리, NB, 모, 여
Special matrix: 마그네슘, V, Cr, 망, 공동, 아연, Zr, NB, 모, Ag, Sn, HF, 깃 달기, 여, 답장, 납, Sn.
(3) Support the analysis of samples of various shapes
Supports analysis of samples of various shapes without the need for special fixtures
(4) Analysis of efficiency advantages
The analysis speed is faster than the field carbon measurement technology
(5) Powerful application extension and modeling software ProfileBuilder
(6) Unparalleled compatibility
After the spectral information of SciAps LIBS sample is derived, the spectrum can be solved by other LIBS spectral solution software.

LIBS XRF spectrometer analyzer

3.SciAps Z-902C+ series technical specifications

1. Working conditions:
1.1 작동 온도: -10℃-40℃
2. Equipment use:
2.1 Can analyze the content of carbon element and alloy composition in alloy materials, and automatically identify alloy grades.
3. 기술 사양:
1. 크기: 273*73*12 (mm), weight about 3 kilograms, 가벼운 무게, 휴대하기 쉬운,
2. Excitation source: 5-6 mj/ pulse, 50 Hz repetition rate, 1064 nm laser source
3. Spectrum analysis range: multi-CCD spectrometer :190 nm-625 nm.
4. Spectral data acquisition:
Unique Time Gating technology, minimize the interference of background noise to signal, improve test accuracy and precision;
5. Electronic signal processing: ARM Cortex-A9 dual-core / 1.2GHz memory: 1 GB DDR2 memory, 1 GB memory
6. Auto focus: Computer control manual or automatic adjustment of laser focus sample position
7. 전원공급장치: rechargeable lithium battery and charger.
8. 표시하다: 2.7″ color touch screen smartphone display -PowerVR SGX540 3D graphics
9. Data storage: 32GB SD
10. 의사소통 – data transmission: Wifi, 블루투스,USB(transmission function can be turned on or off according to customer requirements).
11. 카메라: 분석 프로세스에서, the on-board camera helps to locate the detection position, and the built-in high-definition camera and video imaging system can carry out accurate micro-area analysis
12. 운영 체제: Android intelligent operating system
13. Operation/Argon purification: Argon evolution characteristic spectral signal, reduce the absorption of air to characteristic light, maximize the maintenance of characteristic spectral signal strength; Built-in high purity argon environment, built-in screw in the handle of the instrument miniature argon cylinder, user replaceable argon cylinder for operation in an argon purification environment. Argon tank provides about 600 tests before replacement.
14. The laser test stroke can be adjusted according to the size and shape of the sample, the maximum laser test stroke can be set to 16 엑스 16,256 테스트 포인트, at least one test point can be set.
15. Alloy composition testing and grade confirmation meet the requirements of the American Petroleum Institute (API) recommended procedure API 578.
16. 동시에, it can analyze the content of Li, BE, B and other elements in the alloy and the types and contents of conventional alloy elements
17. A single laser with a diameter of 10um can test the element composition of small samples, ultra-thin samples or sample coatings of mm level;
18. Alloy analysis mode: can analyze conventional aluminum alloy, copper alloy, 스테인레스 스틸, nickel alloy, titanium alloy, cobalt alloy, iron alloy samples; Contains more than 500 alloy grades, users can use ProfileBuilder software to add their own alloy grades.
19. Carbon alloy analysis mode: can analyze the carbon element in stainless steel low alloy steel, alloying element content, identify the grade;
20. Carbon equivalent analysis function: The instrument can automatically calculate the carbon equivalent of low alloy steel according to the detected material composition, which helps the field judge weldability and improve work efficiency;
21. Element analysis mode: Qualitative analysis can be done on all kinds of unknown samples including but not limited to alloy ceramics ores and other samples, and the elements that need to be detected can also be added at any time according to customer needs;
22.PB software: allows customers to add their own unique samples to the alloy grade library;
23. 교정 점검: Complete automatic calibration and wavelength calibration verification by testing the internal shutter of 316 스테인레스 스틸
24. Drift correction: Only the test with high accuracy requirements needs to run drift correction function. Drift correction is done automatically by testing factory-supplied standard parts
25. 안전: Laser safety level 3B, built-in sample sensing device, no sample test window, no laser excitation, 기기 안전 수준 1, no ionizing radiation; Password protection to ensure data security and unauthorized personnel operating the instrument.
표준 액세서리: waterproof outer case, 2 Li-ion battery, 충전기, USB 케이블, ProfileBuilder software, editable alloy grade library (alloy application), boot self-test sample. Training support, free software upgrades for life.

LIBS XRF spectrometer analyzer

4. Instrument Configuration List List of consumable items

SciApsZ series configuration list
1 주인 1 Piece
2 alloy testing software 1 세트
3 operating system 1 세트
4 built-in HD camera 1 Piece
5 USB data transmission cable 1 Piece
6 High capacity lithium battery 2 Pieces
7 intelligent charging system 1 세트
8 Spare a quartz window 1 Piece
9 waterproof transport plastic box 1 Piece
10 Software backup USB flash drive 1 세트
11 instruction manual 1 세트
12 small argon tanks and 5 bottles
13 alloy standard samples 3 Sets
14 Portable sander 1 세트
15 spare screwdriver 1 세트

SciApsZ series consumable list
1. Small argon tank
2. Sanding sheet