KGBD808 Battery Capacity Discharge Tester

설명

KGBD808 Battery Capacity Discharge Tester

제품소개
KGBD808 battery discharge tester is designed for deep discharge, capacity test and daily maintenance of 48V or 110V or 220V battery sets. Power consumption components all adopt the new PTC, 작은 크기, 가벼운 무게, easy to move. The whole machine is controlled by microprocessor, LCD 디스플레이, 중국어 메뉴. The discharge parameters can also be entered by the computer. Once the parameters are set, the whole discharge process is automatically completed. Fully intelligent.

KGBD808 Battery Capacity Discharge Tester

제품 매개변수
1, load voltage range: DC48V±10% DC110V±10% DC220V±10%
2, set discharge current: 0-100ㅏ (지속적으로 조정 가능)
3, current adjustment accuracy: 0.1ㅏ
4, current measurement accuracy: 1%
5, voltage measurement accuracy: 1%
6, timing time: 0-15 시간
7. Cooling method: forced air cooling
8, 주변 온도: -10℃-50℃
9. 주변 습도: 20%-80%
10, 작동 전원 공급 장치: AC220V±15%50±5HZ
11, overall size: 430×300×940 (mm) (length × width × height)
12. 무게: 40킬로그램

KGBD808 Battery Capacity Discharge Tester

제품특성
1, microcomputer control, LCD 디스플레이, 중국어 메뉴; Real-time display of various detection data (전압, 현재의, discharge start time is timely and long, 용량, voltage protection low limits, 등.) to understand the operating status of the equipment at any time.
2, keyboard operation. Set various discharge parameters and various instructions for machine operation through the keyboard (can also be transmitted through the computer).
3, automatic protection. When the discharge time or discharge capacity is set, the battery voltage is lower than the set protection voltage or the load connection is abnormal, the discharge will stop automatically and the alarm will be generated. 동시에, the shutdown mode is automatically recorded.
4. Power off function. During the discharge process, if there is an unexpected power failure, the preset discharge parameters are automatically saved. After an incoming call, the discharge data is automatically stored continuously, and the device is not damaged.
5. Data collection. Data is collected and stored at a faster rate two minutes after the discharge begins, and every minute thereafter. It is convenient to analyze the performance of battery pack.
6. Data processing. All kinds of detected data can be uploaded to the computer through 232 communication port or USB port, processed by special software (random configuration), generate a variety of intuitive reflection of battery pack performance curves, columns, reports, 등., and can be amplified, queried, printed.
7. Correction function. The voltage and current values can be corrected (verified) either before or during discharge.
8. Data storage. Can automatically store each discharge does not exceed 15 hours eight consecutive discharge data, power failure is not lost.
9, power consumption components. The use of new PTC, safe and pollution-free, 작은 크기, 가벼운 무게, fast heat dissipation.