BGD 860 크세논 테스트 챔버(신규)

설명

BGD 860 크세논 테스트 챔버(신규)

BGD 860 is a powerful, highly cost-effective, easy to use and convenient to maintain xenon test chamber. It uses an imported air-cooled xenon lamp and relevant daylight filter, to simulate more real and much better the full spectrum sun light of outdoor, ensure the test results obtained from laboratory have a perfect correlation with outdoor application. 뿐만 아니라, the samples holder is designed with a special rotating drum to ensure each sample can obtain the same and uniform irradiance during the whole test.

BGD 860 Xenon Test Chamber can meet with all standards requirements from different fields, it can hold 22 pieces samples, not only has spray function, but also can control the relative humidity of working room.

Working Room

연산자는 필요한 모든 테스트 매개 변수 (조도를 설정할 수 있습니다, 테스트 시간, BPT, BST etc）through the touch screen, 언제든지 실행 상태를 확인할 수 있습니다. All running parameters can be exported to computer directly through the USB interface.

BGD 860 크세논 테스트 챔버(신규)

캐릭터

◆ Xenon lamps imported from America can ensure the test results have a good repeatability and comparability.

◆ Special rotating-drum design for samples holder ensure each sample can obtain the same and uniform irradiance during the whole test.

◆ 조도 에너지를 정확하게 제어 할 수 있습니다. 그만큼 “폐 루프” 제어 시스템은 노화 또는 기타 요인으로 인한 빛 강도의 변화를 자동으로 보상 할 수 있습니다..

◆ Can choose narrow band （at 340nm or at 420nm）or broad band（from 300nm～400nm or from 300nm～800nm）to control irradiance.

◆ Affordable air-cooled xenon lamp, the lifetime can reach 1,500 시간.

◆ Can choose three different filters（Daylight, Window glass, Extended UV） to meet different test requirements.

◆ The test procedures can be programmed freely; can set 10 programs and save 6 predetermined programs in one time. Every program includes up to 10 segments for setting parameters.

◆ Can set and control precisely and automatically the relative humidity of working room.

◆ Can set the cumulative energy （total irradiance energy）obtained by sample to finish a test procedure.

◆ With spray function, can set spray time and spray interval time.

◆ 사용자는 조도 또는 검은 색 패널 온도를 스스로 쉽게 보정하고 조정할 수 있습니다..

◆ 높은 정밀 PT100 온도 센서. BPT（black panel temperature）, BST（black standard temperature）and working room temperature can be set and controlled precisely and automatically during the whole process

◆ Alarm and protection function：Over temperature（BPT，BST，Working room）, big deviation of irradiance，shortage of spraying water, abnormal lamp power，big error of humidity.

◆ 터치 스크린 및 사용자 친화적 인 작동 인터페이스는 작업자가 테스트 매개 변수를 설정하고 모든 테스트 프로세스를 쉽게 모니터링 할 수 있습니다..

◆ 실시간 데이터를 수집하고 기록 할 수 있습니다. The incidental USB connector allow users to download the test data（EXCEL format）directly, 무인 운영 달성.

Operation-Menu

 

BGD 860 크세논 테스트 챔버(신규)

기술적인 매개변수

■ 크세논 램프：하나 1.8 kW xenon lamp （imported from America）

■ 필터：Daylight filter （Also can choose extended UV filter or window glass filter）

■ 램프 수명: 가까운 1,500 시간

■ 노출 영역：2,200 센티미터² (넣을 수 있습니다 22 pcs samples of 150×70mm size)

■ 조정 가능한 조도 범위：

0.3～0.75 W/m² (Single point of control：340nm)
0.5～1.35 W/m² (Single point of control：420nm)

■ Controlling irradiance point：340nm or 420nm or 300nm～400nm（show at the same time）

■ Adjustable Black Panel Temperature Range：RT～100℃

■ Adjustable Working room Temperature Range：RT～65℃

■ Adjustable relative humidity of working room：10%～75%（Light）；10%～95%（Dark）；

■ 전체 크기：860mm×800mm×1770mm

■ 순중량：200킬로그램

■ 전원공급장치：AC 380V（Three-phase four-wire system）/ 50HZ；맥스. 현재의 16 ㅏ

■ Total Machine Power：5.5KW

BGD 860 크세논 테스트 챔버(신규)

■ Requirements of Compressed air：Clean，oilless compressed air with 0.5MPa pressure，맥스. air supply is near 60L/min. Average air consumption is 10L/min～30L/min（Depends on testing standard）

■ 주문 정보:

BGD 860—Xenon Test Chamber

BGD 860 크세논 테스트 챔버(신규)

Test Standards
ISO 11341《Paints and varnishes-Artificial weathering and exposure to artificial radiation–Exposure to filtered xenon-arc radiation》

ISO 12040 《Graphic Technology – Prints and Printing Inks – Assessment of Light Fastness Using Filtered Xenon Arc Light 》

ISO 16474-1 《페인트 및 바니시 — 실험실 광원에 노출시키는 방법 — 부분 1: 일반 안내》

ISO 16474-2 《페인트 및 바니시 — 실험실 광원에 노출시키는 방법 — 부분 2: Xenon-arc lamps》

ASTM D3451 《Standard Guide for Testing Coating Powders and Powder Coatings》

ASTM D3794《Standard Guide for Testing Coil Coatings》

ASTM D4303 《 Standard Test Methods for Lightfastness of Pigments Used in Artists’ Paints》

ASTM D5010 《Standard Guide for Testing Printing Inks and Related Materials》

ASTM D6577 《Standard Guide for Testing Industrial Protective Coatings》

ASTM D6695 《Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings》

ASTM G151《Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that

Use Laboratory Light Sources》

ASTM G155《Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials》

ISO 4892-1 《Plastics – Methods of Exposure to Laboratory Light Sources – Part 1: 일반 안내》

ISO 4892-2《Plastics – Methods of Exposure to Laboratory Light Sources – 부분 2: Xenon-arc lamps》

SAE J2412 《Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus》

 

BGD 860 크세논 테스트 챔버(신규)

Optional Accesories

BGD 8150—미국 크세논 램프 (1.8 kW)

BGD 8170—Pure Water Machine（50L/h）

BGD 8179—Air Compression System（Includes air compressor、air reservoir、freezing dryer、precise filter etc）

BGD 8183—Daylight Filter

BGD 8184—Window Glass Filter

BGD 8185—Extended UV filter

(보다 크세논 교정 방사기)

BGD 8140

BGD 8170