GA-2000S Tensile Testing Machine

Descrizione

Tensile Testing Machine

IO.Main functions

This machine is suitable for rubber, tire, hose, tape, suola, plastica, film, acrylic, FRP, Addominali, EVA, PU, aluminum-plastic pipe, composite material, waterproof material, fibra, tessile, filo e cavo, carta, gold foil, tape, silk, spring, wood, medical packaging materials, tape and other stretching, compression, tearing, stripping (90 degrees and 180 degrees Can) and other mechanical properties test and analysis.

This machine is a new type of material testing machine combined with electronic technology and mechanical transmission, the load, deformation, displacement measurement and control has a high accuracy and sensitivity, the series of models using a single space structure, test space in the next space, mainly suitable for test load less than 5kN metal, non-metal material test, with stress, strain, displacement control mode. The maximum force, resistenza alla trazione, bending strength, resistenza alla compressione, modulo elastico, allungamento a pausa, yield strength and other parameters can be calculated.

Tensile Testing Machine

II.Introduction of control software

• Lingua del sistema operativo del software: Simplified Chinese/English.
• Force unit: N, KN, Kgf, Lbf, length unit: mm, cm, in può essere liberamente convertito;
• Automatic return to zero: the measuring system will automatically return to zero when the computer receives the test start instruction;
• Modalità di visualizzazione: data and curve dynamic display with the test process;
• Result reproduction: the test results can be accessed at will, and the data curve can be re-analyzed;
• Result comparison: Multiple test characteristic curves can be superposition, reproduced, enlarged and presented in different colors for analysis and comparison of a group of samples;
• Emergency stop: equipped with emergency stop switch, used to cut off the power supply of the machine in emergency;
• Modalità di controllo:
• Computer software to set speed, set load break (rupture), tempo di esecuzione e altri metodi di controllo

u ·automatically determines material fracture, schiacciamento, eccetera., and automatically stops, and can be set to automatically return

• Type of curve:

u ·load-displacement, tempo di caricamento, tempo di spostamento.

u ·stress-strain, tempo di sforzo, tempo di stress.

u ·Le coordinate verticale e orizzontale della curva possono essere impostate arbitrariamente.

• Available test information:

u ·Forza massima, forza minima, breaking value, limite di snervamento superiore e inferiore, resistenza alla trazione, resistenza alla compressione, modulo elastico, allungamento, maximum, valore minimo, average value of stripping interval, eccetera. With overload, sovracorrente, sovratensione, sottotensione, velocità eccessiva, ictus e altre protezioni multiple.

u ·The data results are exported in the crystal report format currently accepted by the national standard.

Tensile Testing Machine

III.Parametro tecnico

Capacity selection	KN 10KN 20KN Optional, American brand high precision load unit
Precision class	Level 0.5
Effective force measurement range	0.4％～100％
accuracy of force measurement	Within ± 0.5% of the indicated value
Testing machine resolution	The maximum load is 1/± 250,000 yards, the internal and external files are not divided, and the whole resolution is unchanged
Load sensor	Basic configuration: Tension and pressure sensor (maximum load)
Effective test width	400mm
Effective stretching space	More than 1400mm (without fixture) (more than 500mm inside the box)
Testare la gamma di velocità	0～500mm/min
Displacement measurement accuracy	Within ± 0.5% of the indicated value
Test bench safety device	Electronic limit protection
Test bench return function	Manual or automatic options, after the end of the test automatically or manually return to the initial position of the test
Overload protection	Over 10% of the maximum load, the machine automatically protects
Fixture configuration	Stripping fixture set
Main engine size	800×500×2500mm
Electric machine	220V±10% 0.4KW Japan Tama River servo motor
Driving mechanism	High precision ball screw
Main engine weight	(Di) 460 Kg