- Descrizione
- Inchiesta
Descrizione
RLC Tester
Descriptions
AT2818 adopts true-color TFT-LCD and English operation interface (Chinese also available). AT2818 (Rev B2.0) has been upgraded into continuous frequency with the resolution of 0.001Hz.
Four parameters can be measured simultaneously by AT2818, Any parameters can be set arbitrarily. Both main & sub parameters can be displayed in 6 dgt after the improvement. AT2818 can not only scan 10 kinds of frequency or voltage level list, but also correct three groups of user frequency so as to improve the accuracy.
| SPECIFICHE | |
|
AT2818 Precision LCR Meter |
|
| Parametri |
Cs-Rs,Cs-D,Cp-Rp,Cp-D,Lp-Rp,Lp-Q,Ls-Rs,Ls-Q,Rs-Q,R-X,Z-θrad,Z-θdeg |
| Monitor Parameters |
Z, D, Q, θr, θd, R, X, G, B, Y, Vac, Iac, D, D% |
| Precisione di base | 0.05% ± 5 dgt |
| Frequenza | 10Hz – 300kHz (frequenza continua, frequency resolution 0.001Hz) |
| Schermo Allineare | l: 0.00001mH-999999H C: 0.00001pF – 999999mF R,Z: 0.00001W – 99.9999MW D, 0.00001 – 9.99999 Q: 0.00001 – 99999.9 D%: -999999% – 999999%
Q(grado): -179.999° -179.999° q(rad):-3.14159 – 3.14159 |
| Resistenza alla fonte | 30OH, 50OH, 100OH |
| Allineare |
Automatic, Manual, and nominal, 9 ranges |
| Display Max | 6 digital, principle parameter: 999999; sub parameter:999999; monitor parameter: 999999 |
| Livello del segnale |
0.01V – 2.00V (10mV Step) |
| Velocità | 30t/s, 10t/s, 6 t/s, 3 t/s 1-256 la media dei tempi è disponibile |
| Comparatore |
14-smistamento dei contenitori, 10-sono GD, 1-bidone N.G, 1-contenitore AUX, 2-bin principle parameter NG; Count Function: Massimo – 999999 |
| Prova dell'elenco |
10 misurazione della scansione di frequenza e livello di gruppo |
| Regolazione |
Aprire & Short circuit sweep frequency reset, 3-point frequency reset and load calibration. |
| File |
10 group files to save user’s setting, 1 group to save system data real-time |
| Interfaccia | RS232C, ExHandler interface, standard configuration USB Disc interface (article 10000 data) |
| Altri | LCR Automatic selection, keypad lock, SCPI instruction set, true-color TFT-LCD Display |
| CARATTERISTICHE GENERALI | |
| Alimentazione elettrica |
Voltaggio: 90V AC – 250V AC; Frequenza: 50Hz-60Hz; Max Power: 20VA |
| Misurare |
264mm (larghezza)x107mm(altezza)x350mm(depth); 4kg |
| INFORMAZIONI PER L'ORDINAZIONE | |
| Accessori | ATL501E Test cable
ATL508A SMD patch test clip ATL601 Test fixture ATL600 Short-circuit slice ATL108 RS232 Communication cable Cavo di alimentazione CA |
| Opzionale | ATL608 SMD patch clamp
ATL508 SMD patch test clip ATS2818 Data acquisition software |
