ISO 11998 Wet Abrasion Scrub Tester “Determination of wet-scrub resistance and clean abilityof coatings”

ISO 11998 Wet Abrasion Scrub Tester “Determination of wet-scrub resistance and clean abilityof coatings”

ISO 11998 Wet Abrasion Scrub Tester “Determination of wet-scrub resistance and clean abilityof coatings”

  1. Scope
    The ability of coatings to withstand wear caused by repeated cleaning operations and to withstand penetrationby soiling agents is an important consideration both from a practical point of view and when comparing andrating such coatings. This intemational Standard describes an accelerated method for the determination ofwet-scrub resistance. With regard to the cleanability of coatings, only the method itself and not the soilingagents are specified.
    NOTESince these properties depend not only on the quality of a coating but also on the substrate, the method ofapplication, the drying conditions and other factors, the results obtained are not directly transferable to actual practice. inthis standard the evaluation of the coating is based on a defined substrate, a fixed application method, specified dryingconditions and a defined method of wet scrubbing.

2. Wet-scrub resistance
The test coating is applied to a test panel using a film applicator at the appropriate gap clearance. After dryincand conditioning, the coated panel is weighed and subjected to 200 wet-scrub cycles in a scrub testingmachine.

Wet Abrasion Scrub Tester GA-6008

Abrasion resistance is an important property for paint and coatings. It’s also common for tile, flooring, furniture, wall coverings, shower stalls, and bath tubs. The tester produces a repeatable, controlled condition to simulate everyday use or wear pattern. With a flexible design to use brushes, sponges, abrasive pads, and sand paper to wear the surface. Besides abrasion testing, washability tests can also be performed.Stain resistance and detergent testing are additional uses for abrasion testers.

ISO 11998 Wet Abrasion Scrub Tester “Determination of wet-scrub resistance and clean abilityof coatings”

Our machine  GA-6008 is designed according to this standard and is currently widely used internationally.
Contact
Email: arlenliu@gonoava.com
WhatsApp: 0086 18670728798(We chat)
If you have any questions you can send me a message or email.