- Keterangan
- Pertanyaan
Keterangan
Penguji Penghancur Cincin
Perkenalan
Penguji kekuatan kompresi komputer mikro adalah penguji kekuatan kompresi kertas dan papan yang dikontrol layar sentuh, yang digunakan untuk menguji kekuatan tekanan cincin kertas, kekuatan tekanan tepi karton, kekuatan ikatan papan bergelombang, kekuatan tekan papan bergelombang dan lain sebagainya. Pabrik kertas biasanya digunakan untuk menguji RCT kertas dengan ketebalan 0.15 ~ 1,00mm.Karton, pabrik karton dan perusahaan karton biasanya digunakan untuk menguji kekuatan kompresi tepi papan bergelombang (DLL), kekuatan kompresi datar (FCT), kekuatan ikatan (MENEPUK) dan kekuatan tekan rata (CMT) dengan diameter kurang dari 60mm. Instrumen ini merupakan alat uji tambahan yang ideal untuk perusahaan pembuatan kertas, produsen kertas karton, produsen karton, pengguna karton dan departemen pengawasan dan inspeksi kualitas.
Standar tes
GB/T 2679.8 penentuan kuat tekan cincin kertas dan kertas karton(daerah sampel: 152.4×12.7mm)
GB/T 6546 “penentuan kekuatan tekanan tepi papan bergelombang”;(daerah sampel: 25mm×100mm)
GB/T 6548 “penentuan kekuatan rekat papan bergelombang”;(daerah sampel: 25mm×80mm)
GB/T 2679.6 penentuan kuat tekan datar kertas dasar bergelombang;(daerah sampel: 64.5cm2/32.2cm2)
Penguji Penghancur Cincin
Spesifikasi
Tipe produk:Kontrol layar sentuh dengan kurva uji.
rentang pengukuran: 5 ~ 5000N
Kekuatan menghancurkan tepi:0-50000tidak ada/m
Kekuatan penghancur cincin:32.89KN/M
Ketepatan:≤1%
Resolusi: 0.01 N,0.01kg,0.01LB
uji kecepatan: 12.5mm/menit
Daerah Tes:Area pelat tekan Atas Bawah>100cm2 Tinggi:80mm
Modus uji:RCT,DLL,MENEPUK,FCT
Simpan data:dapat menyimpan 100 data grup
Hasil cetak:Hasil pencetakan kertas termal
Ukuran luar:320*300*520mm
Berat:50kg
Fungsi:Menyimpan dan melihat data, kesalahan penghapusan data, pencetakan data, pengaturan parameter, kalibrasi peralatan, pemantauan data waktu nyata, penyelesaian tes diatur ulang, kontrol efek uji, membatasi perlindungan, dll..
Aplikasi: karton, kertas, papan bergelombang, kotak warna, papan plastik berongga, karton kecil, tabung kertas kecil
Penguji Penghancur Cincin
RCT – Ring Crush Test : A sample of paper or cardboard is placed in a ring formation and subjected to a successively increasing edge compression force until it breaks,then the resistance force is measured. The RCT value is the force divided by the sample’s length.
Standar yang berlaku：GB/T2679.8 APPITA/AS 1301.407s, PAPTAC D.33P, DARI 53134, ISO 12192, JIS P8126, SCAN P 34, TAPPI T 822
CLT – Concora Liner Test measures the same way as RCT, but is carried out in another type of sample holder.
CCT – Corrugated Crush Test: A sample is corrugated between heated corrugating rolls. The sample is fixed in a special jig that is adapted to the corrugated shape. The crushing force is applied and measured parallel to the top of the corrugating medium. The CCT value is the maximal force that the sample can withstand before it breaks.
Standar yang berlaku：SCAN P 42, TAPPI T 843
CMT – Concora Medium Test: A sample is corrugated between heated corrugating rolls. The flute is fixed and held together by a pressure-sensitive tape, so that single-sided corrugated board is imitated. The crushing force is applied vertically to the paper ,then the breaking force is measured. The CMT value is the maximal force the sample can withstand before it breaks.
Standar yang berlaku：GB/T2679.6 APPITA/AS 1301.434s, PAPTAC D.24P, DARI 53143, EN ISO 7263, ISO 7263, SCAN P 27, TAPPI T 809
ECT – Edge Crush Test: A sample of corrugated board is subjected to increasing force, parallel to the flutes, until it breaks. The ECT value is the breaking force divided by the sample’s width.
Standar yang berlaku：GB/T6546 APPITA/AS 1301.444s, DARI 53149, EN ISO 3037, FEFCO No.8, ISO 3037, ISO 13821, SCAN P 33, TAPPI T 811, T 823,T 838, T 839
FCT – Flat Crush Test : A sample of corrugated board is subjected to vertical increasing force until the fluting breaks. The FCT value is the force divided by the sample’s surface area.
Flat Crush Hardness – A measurement of the corrugated board’s yield point in a FCT sample. Equivalent to the first ‘peak’.
Flat Crush Energy – The total energy absorbed during a FCT measurement.
Standar yang berlaku：GB/T22874 APPITA/AS 1301.429s, DI DALAM 23035, FEFCO No.6, ISO, 3035, SCAN P 32, TAPPI T 825
PAT – Pin Adhesion Test：Adhesion resistance is the maximum force required to separate the linerboard from the fluting with the help of a special sample holder.
Standar yang berlaku：GB/T6548 APPITA/AS 1301.430s, TAPPI T 821
SQT – Score Quality Test：A sample is placed on a U-shaped support and pressed by a thin strip, exactly above a score, until it breaks. The ratio between the scored and un-scored values gives the score ratio.
Standar yang berlaku：TAPPI T 829
CL—Constant Load Test：The test load, speed and time are input to test the deformation of the sample under constant load and specified time.
DL—Deformation Load Test：Input deformation and test speed, test the maximum load of the sample.
lampiran 
Sample cutter
