BGD212 Batang Luka Kawat

Keterangan

BGD212 Batang Luka Kawat

Wire-wound Rods

The wire and its rod from the wire-wound rods are made of stainless steel，which are corrosion-resistance. A coating（Paint or Ink）is being drawdown by a known thickness wire-rod applicator over a substrate（eg. Black/White Test Chart, Glass or Wood Panel, etc.）onto our Drawdown Board. The motion of the drawdown is done by gripping the 2 edges of the applicator or by using the Holder

These applicators provide an economical way to assure the uniformity of thickness of very thin films.

◆ Bar and wire manufactured of stainless steel

◆ Perfect for very thin films, e. G. foils and paper coating tests

◆ Ideal for flexible materials such as paper, cardboard, test charts, foils, kulit, tekstil, dll..

◆ Maximum attainable wet film thickness engraved on bar end

◆ Simultaneous drawdown of several samples side by side is possible

BGD212 Batang Luka Kawat

Parameter teknik

■ Effective Wire-Wounding Length：200mm

■ Bar Total Length：240mm

■ Theoretical Wet Film Thickness（µm）available：6-8-10-12-15-20-25-30-40-50-60-80-100-120-150-200

■ Bar Diameter：10mm

■ Informasi Pemesanan：

BGD 212/6—6µm Wire-wound Rod

BGD 212/8—8µm Wire-wound Rod

………………….

BGD 212/150—150µm Wire-wound Rod

BGD 212/200—200µm Wire-wound Rod

BGD 1152—Holder for Wire-wound Rod

BGD 216—Wire-wound Rod set 4（includes any 4pcs different size wire bar coaters, a holder and a carrying case）

BGD212 Batang Luka Kawat

Catatan: All rods produced by BGD are distinguished by its wire diameter or groove depeth. Misalnya, we mark 1.0mm wire diameter as 100 um wire-wound rod, 100 um is only theoretical wet film thickness, and the achieved fact wet film thickness is only 75%～80% of theoretical value.