Anbai AT2811 Digital Bridge Meter
- Keterangan
- Pertanyaan
Keterangan
Digital Bridge Meter
Descriptions
AT810D/AT2811 digital LCR meteriscreated as the smallest bench-type digital meter, this depends on Applentprofessional intelligent instrument technology. Four grades of test frequency: 100Hz, 120Hz, 1kHz, 10kHz; 6 parameters (L, C, R, Z, D, Q) can be tested and the built-in comparator caneasily deal with the sorting operation of components which made AT2811 high cost-performance.
Digital Bridge Meter
Parameter Teknis
| Spesifikasi | |||
|
AT810D Digital LCR Meter |
AT2811 Digital LCR Meter promotion |
||
| Parameter | L,C,R,Z,D,Q,Saya(deg),Saya(rad) | L,C,R,|Z|,D,Q | |
| Akurasi Dasar | 0.2% | 0.25% | |
| Frekuensi | 100Hz, 120Hz, 1kHz, 10kHz | 100Hz, 120Hz, 1kHz, 10kHz | |
| Display Range | L: 0.01μH-9999H C: 0.01pF-9999μF
R,Z:0.0001Ω-99.99MΩΔ%: -9999% – 9999%D: 0.0001 – 9.9999Q:0.0001-9999 |
L: 0.01mH-9999H C: 0.01pF-9999mF
D: 0.0001–9.999 Q: 0.0001–999.9 R,Z: 0.0001W – 99.99MW |
|
| Max Reading | Principle parameter: 99999 sub parameter: 99999 | ||
| Source Resistance | 30W and 100W | ||
| Jangkauan | Automatic and manual with 6 rentang | ||
| Signal Level | 0.1Vrms, 0.3Vrms and 1Vrms | ||
| Kecepatan | 2 times/second, 5 times/second | Lambat: 3 times/second, Cepat: 10 times/second | |
| Sirkuit Setara | In series and parallel | ||
| Result Display | Menunjukkan & sorting results | ||
| Pengaturan | Short and open sweep frequency correction | ||
| Pembanding | 5-bin sorting | ||
| Perlindungan | 1000V/10mF,600V/80mF or 400V/150mF capacitance electrify protection | None | |
| Antarmuka | Optional RS232 | None | |
| Beep | P1, P2, P3, Dari, OFF | ||
| Yang lain | tampilan PKS, keypad lock and data hold function | LCR automatic parameter select, LED display | |
| Fitur Umum | |||
| Sumber Daya listrik | Tegangan: 198V dan – 240V dan, Frekuensi: 50Hz, Kekuatan: Max 15VA | ||
| Ukuran | 264mm(Lebar)x107mm(Tinggi)x350mm(Kedalaman) 4kg | 220mm (Lebar)x85mm (Tinggi)x259mm (Kedalaman); 2kg | |
| Informasi pemesanan | |||
| Tambahan | ATL501: Test cableATL601: Test fixture
ATL600: Short-circuit device Opsional: ATL608 SMD patch clamp ATL508: SMD patch test clip |
ATL501: Kelvin Test clip; AC power cord | |
