ASTM D 1155-2020 “Angle of Glass Beads”
Arti dan Tujuan
4.1 The roundness of a glass sphere is a measurable aspect related to its performance as a retroreflective medium. The function of this test method is to measure the percentage of true spheres associated with compliance with the applicable specification.
Catatan 1: This method has been used in other industrial areas beyond the intended scope of this test method.
ASTM D 1155-2020 “Angle of Glass Beads”
Ruang lingkup
1.1 This test method 2 covers the determination of the percentage of true spheres in glass spheroids used for reflective marking purposes and for industrial use.
1.2 The test method includes the following two processes:
1.2.1 Procedure A, where the selected specimens are divided into two size ranges or groups and then separated into true spheres and irregular particles, Dan
1.2.2 Procedure B, where the selected specimens were divided into five size ranges or groups prior to separation.
1.2.3 In determining compliance with the requirements of the code, procedure A or Procedure B may be used. If the test indicates failure to reach the specified percentage of true spheres and irregular particles, a referee test shall be performed according to procedure B.
ASTM D 1155-2020 “Angle of Glass Beads”
1.3 Nilai yang dinyatakan dalam satuan SI harus dianggap sebagai standar. Nilai yang diberikan dalam tanda kurung hanya untuk referensi.
1.4 Standar ini tidak dimaksudkan untuk mengatasi semua masalah keselamatan, jika ada, terkait dengan penggunaannya. Pengguna standar ini bertanggung jawab untuk menetapkan keselamatan yang sesuai, praktik kesehatan dan lingkungan dan untuk menentukan penerapan pembatasan peraturan sebelum digunakan.
1.5 Standar internasional ini telah dikembangkan sesuai dengan prinsip-prinsip standardisasi yang diakui secara internasional yang ditetapkan dalam Keputusan Prinsip-Prinsip Pengembangan Standar Internasional, Pedoman dan Rekomendasi yang dikeluarkan oleh Komite Hambatan Teknis Perdagangan Organisasi Perdagangan Dunia.