High speed disperser oil change tutorial steps

The following are the general steps for the oil change of the high speed disperser:

1. Preparation:

Turn off the high speed dispersion machine and disconnect the power.

Ensure that the working environment of the dispersing machine is clean and the necessary tools and equipment are ready.

2, discharge of old oil:

Open the oil drain valve at the bottom of the disperser to drain the old oil. A container can be used to receive discharged oil.

Try to completely drain the old oil and ensure that the old oil in the system is completely removed.

High speed disperser oil change tutorial steps

3, cleaning and dispersing machine parts:

Use an appropriate solvent or cleaning agent to clean the various components inside the dispersion machine, such as grinding discs, grinding beads and containers.

Use a brush or soft cloth to clean hard-to-reach areas and ensure that dirt and sediment are removed thoroughly.

4. Add new oil:

Select the appropriate new oil according to the specifications and requirements of the dispersing machine.

Use the appropriate tool to add the new oil to the tank of the disperser or to the specified location.

According to the production requirements, determine the amount of oil required and follow the manufacturer’s recommendations.

5. Start the dispersing machine:

Close the drain valve and ensure all connections are tight.

Connect the decentralized electrical power supply and turn on the power switch.

Start the dispersing machine and adjust the speed and other parameters as needed.

High speed disperser oil change tutorial steps

Note:
During operation, ensure that safe operation procedures are followed and appropriate personal protective equipment is worn.

Depending on the specifications and use of the disperser, more frequent oil changes and cleaning may be required.

Before replacing the oil, it is best to refer to the operator’s manual or consult the manufacturer to ensure that the correct steps are followed.

Please note that the specific oil change tutorial may vary by dispersion model number and manufacturer. Therefore, before performing any operation, always refer to the appropriate disperser user manual and follow the manufacturer’s guidance and recommendations.