7
70
701
702
703
704

Tonghui TH8203 Programmable DC Electronic Load

Tonghui TH8201 Programmable DC Electronic Load
Charge électronique CC programmable Anbai AT8612

Catégories: ,

Description

Charge électronique CC

Caractéristiques
Constant current (CC), résistance constante (CR), constant
pouvoir (CV), puissance constante (CP) operation mode
Current remote control monitoring function, déclencheur externe
fonction
1mV/10μA high resolution, ripple measurement function
Dynamic current/voltage test, up to 50K dynamic frequency
Voltage and current measurement can achieve high precision
while testing speed up to 100KHz
Programmable soft start function
CR-LED test, arbitrary I-V characteristics, essai de batterie, dynamic
scan test, load effect, list function and many other advanced
fonctions
Overvoltage (programmable), low voltage, surintensité
(programmable), overpower (programmable), overheating, anti-
reverse protection, etc..
Remote voltage compensation input test function
Short circuit function simulation
The adoption of the Linux operating system makes the number
of internal parameter file storages essentially unrestricted
Perfect U disk function (parameter file storage and loading,
interface screenshot, system firmware upgrade)
Setting parameters support power-off memory function
Intelligent temperature control fan
RS232 (standard), USB (standard), Ethernet (standard), WIFI
(facultatif)
Matching with upper-computer software to achieve remote
operation and monitoring matching

 

Charge électronique CC

Modèle TH8201 TH8202 TH8202A TH8203 TH8204
Input Vltage 1-150V
Actuel 0-400mA 0-4UN 0-40UN 0-800mA 0-8UN 0-80UN 0-400mA 0-4UN 0-40UN 0-1.6UN 0-16UN 0-160UN 0-2.4UN 0-24UN 0-240UN
Pouvoir 0-1.75W 0-17.5W 0-175W 0-3.5W 0-35W 0-350W 0-3.5W 0-35W 0-350W 0-7.0W 0-70W 0-700W 0-10.5W 0-105W 0-1050W
Static Mde mode (constant current mode) CR mode (constant resistance mode) CV mode (constant voltage mode) CP mode(constant power mode)
Précision 0.2% F.S.. 0.2% F.S.. 0.2% F.S.. 0.2% F.S.. 0.2% F.S..
Dynamic Mode
Gamme de fréquences 100Hz~50kHz/0.01Hz~1kHz 100Hz~50kHz/0.01Hz~1kHz 100Hz~50kHz/0.01Hz~1kHz 100Hz~50kHz/0.01Hz~1kHz 100Hz~50kHz/0.01Hz~1kHz
Précision 1µs/1ms+100ppm 1µs/1ms+100ppm 1µs/1ms+100ppm 1µs/1ms+100ppm 1µs/1ms+100ppm
External Waveform Mode (20kHz) : CC Control level range 0~10V accuracy: 0.5%F.S..
Gamme 0-400mA 0-4UN 0-40UN 0-800mA 0-8UN 0-80UN 0-400mA 0-4UN 0-40UN 0-1.6UN 0-16UN 0-160UN 0-2.4UN 0-24UN 0-240UN
Soft Start Setting range: 0~500ms accuracy ±(30%+100µs)
Front Panel BNC Terminal
TRIG OUT The output pulse level is about 4.5V, the output pulse width is about 2μs, and the output impedance is about 500Ω
MON OUT Voltage detection output, the corresponding full-scale current is 1V
Protection function Overvoltage Protection (OVP) Overcurrent Protection (OCP) Over Power Protection (OPP) Over Temperature
Interface Handler,RS232,USB DEVICE,USB HOST,LAN