GA-8011 Testeur de course pour poussette de bébé

Description

GA-8011 Testeur de course pour poussette de bébé

Norme d'essai

The dynamic durability testing machine for stroller conforms to AS/NZS2088:2000 ASTM-F833 and CNS 6263-11, bsl-1996, EN1888:2003 standard

GA-8011 Testeur de course pour poussette de bébé

Résumé

The machine is based on ASTM to push the dynamic test specification of stroller.The test method is to set the model infant in the platform, the platform is fixed on the test platform, and the speed of the conveyor belt is adjusted by 1.4 soil 0.1M/SEC (5KM/H soil 3.6 KM/H). After continuous testing of 64 heures, the visual platform is not damaged.The number of hours is set, and the operation can be stopped automatically. Donc, it can operate 24 hours without the need of staff.The machine is equipped with an electric eye safety device, which can prevent the control of the baby carriage from getting out of control due to the breakage of the handle and rubber band.

GA-8011 Testeur de course pour poussette de bébé

Caractéristiques

The pram running tester is based on the CNS mobile dynamic durability test specification.The test method is: the model infant is in the platform, the platform is fixed on the test platform, and the conveyor belt speed is 1.4 plus or minus 0.1m/SEC (5kw/h/h/h/h).After continuous testing for 64 heures, the visual car table is not damaged.The number of sets can be stopped automatically.The machine is equipped with an electric eye safety device, which can prevent the control of the pram from getting out of control due to the breakage of the handle and rubber band.This machine is suitable for the dynamic testing of the bottom wheel and body during the movement of the hand push stroller.Dynamic durability testing machine based on standard

GA-8011 Testeur de course pour poussette de bébé

Paramètre