Testeur d'indice de fusion GA-1001-A

Description

Testeur d'indice de fusion GA-1001-A

Norme d'essai

GB/T3682-2018,ISO1133-2011, ASTM D1238

Testeur d'indice de fusion GA-1001-A

Discription:

Melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.

Testeur d'indice de fusion GA-1001-A

Product Character:

1.English LCD Touched Screen.Ø

2.Hand automatic cutting material.

3.Double temperature control system, temperature control precision is more accurate, higher heating efficienc

4.Double imported sensors, more accurate temperature gradient from top to bottom, can be used independently, and improve the service life.

5.Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.

6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.

7.Automatic calculation results, and print.

Testeur d'indice de fusion GA-1001-A

Test Methods:MFR Methods

Display Mode:English color touch screen display

Testeur d'indice de fusion GA-1001-A

spécification

Modèle	GA-1001-A
Barrel parameters	Inner hole 9.550±0.005mm
Pistons parameters	Piston head: 9.474±0.005mm
Outlet length	8.000±0.025mm
Paramters	Extrusion hole 1=2.095±0.005mm
Temperature parameter	With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade
Écart de température	Room Temperature~450degree centigrade
Fluctuations de température	±0.2 ℃
Uniformité de la température	±1 ℃
Résolution d'affichage de la température	0.1℃
Display resolution	0.1℃
Maximum comsuption	< 600W
Time display resolution	0.1s
Weight parameters are as follows:
Weight accuracy	±0.5%
Configuration de base	A 0.325kg
	B 1.2kg
	C 2.16kg
	D 3.8kg
	E 5kg
	F 10kg
	G 12.5kg
	H 21.6kg
Position detection
Loop distance from up and down	30mm
Control precision	± 0.1mm
Test flow control
Times of cutting the material	0~10 times
Material cutting interval	0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time	15 min.
Material be installed	1 min.
Material sample temperature recovery time	4 min.
When binder set	1min
Mode de sortie	Micro-automatic print output
Cut material methods	The hand automatic cut into one body
Test load	Eight sets of weights
Pouvoir	AC220V±10% 50/60HZ