BGD 930 Testeur de rugosité de surface
- Description
- Enquête
Description
BGD 930 Testeur de rugosité de surface
Testeur de rugosité de surface is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters。
| Caractéristiques | Informations de commande | ||
| BGD 930 | BGD 931 | ||
| Standard | ISO4287,DIN4768,JIS B,ANSI 146.1 | ||
| Plage de mesure | Ra | 0.005～16μm/1.000～629.9μinch | 0.050～10μm/1.000～400.0μinch |
| Rq | 0.005～16μm/1.000～629.9μinch | —- | |
| Rz | 0.020～160μm/0.780～6299μinch | 0.020～100μm/0.780～4000μinch | |
| Rt | 0.020～160μm/0.780～6299μinch | —- | |
| Précision | ≤±10% | ||
| Résolution | 0.001μm（reading＜10μm） | ||
| 0.01μm（10μm≤reading＜100μm） | |||
| 0.1μm（reading ≥100μm） | |||
| Fluctuation of display value | ≤6% | ||
| Profile digital filter | Filtered profile | RC,PC-RC,GAUSS | —– |
| Non- filtered profile | D-P | —– | |
| Capteur | Radius | 5µm | 10µm |
| Matériel | Diamond | Diamond | |
| Measuring force | 4mN（0.4gf） | 16mN（1.6gf） | |
| Probe angle | 90° | 90° | |
| Vertical radius of guiding head |
48mm | 48mm | |
| Maximum driving stroke | 17.5mm/0.75inch | ||
| Cutoff length | 0.25mm,0.8mm,2.5mm | ||
| Driving speed | Measuring | Sampling length = 0.25mm When Vt=0.135mm/s | |
| Sampling length = 0.8mm When Vt=0.5mm/s | |||
| Sampling length = 2.5mm When Vt=1mm/s | |||
| Returning | Vt=1mm/s | ||
| Evaluation length | 1～5L selectable | ||
| Metric/Imperial | Conversion | ||
| Auto off | √ | ||
| Memory | 7 Groupes | —– | |
| Pc interface | RS-232C | —– | |
| Built in Li-ion battery | Rechargeable | ||
| Operating condition | TEMP | 0～50℃ | |
| Humidité | ﹤85%RH | ||
| Dimension | 140×52×48mm（5.5×2.2×1.9inch） | ||
| Poids net | 420g | ||
BGD 930 Testeur de rugosité de surface
Paramètres facultatifs
BGD 1290—RS-232 or USB cable
BGD 1291—Logiciel
BGD 1292—Sensor for deep groove
BGD 1293—Sensor for curve surface
BGD 1294—Measuring stand
BGD 930 Testeur de rugosité de surface
Testeur de rugosité de surface is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters。
| Caractéristiques | Informations de commande | ||
| BGD 930 | BGD 931 | ||
| Standard | ISO4287,DIN4768,JIS B,ANSI 146.1 | ||
| Plage de mesure | Ra | 0.005～16μm/1.000～629.9μinch | 0.050～10μm/1.000～400.0μinch |
| Rq | 0.005～16μm/1.000～629.9μinch | —- | |
| Rz | 0.020～160μm/0.780～6299μinch | 0.020～100μm/0.780～4000μinch | |
| Rt | 0.020～160μm/0.780～6299μinch | —- | |
| Précision | ≤±10% | ||
| Résolution | 0.001μm（reading＜10μm） | ||
| 0.01μm（10μm≤reading＜100μm） | |||
| 0.1μm（reading ≥100μm） | |||
| Fluctuation of display value | ≤6% | ||
| Profile digital filter | Filtered profile | RC,PC-RC,GAUSS | —– |
| Non- filtered profile | D-P | —– | |
| Capteur | Radius | 5µm | 10µm |
| Matériel | Diamond | Diamond | |
| Measuring force | 4mN（0.4gf） | 16mN（1.6gf） | |
| Probe angle | 90° | 90° | |
| Vertical radius of guiding head |
48mm | 48mm | |
| Maximum driving stroke | 17.5mm/0.75inch | ||
| Cutoff length | 0.25mm,0.8mm,2.5mm | ||
| Driving speed | Measuring | Sampling length = 0.25mm When Vt=0.135mm/s | |
| Sampling length = 0.8mm When Vt=0.5mm/s | |||
| Sampling length = 2.5mm When Vt=1mm/s | |||
| Returning | Vt=1mm/s | ||
| Evaluation length | 1～5L selectable | ||
| Metric/Imperial | Conversion | ||
| Auto off | √ | ||
| Memory | 7 Groupes | —– | |
| Pc interface | RS-232C | —– | |
| Built in Li-ion battery | Rechargeable | ||
| Operating condition | TEMP | 0～50℃ | |
| Humidité | ﹤85%RH | ||
| Dimension | 140×52×48mm（5.5×2.2×1.9inch） | ||
| Poids net | 420g | ||
