Anbai AT518 AT518L Compteur milliohm portable
- Description
- Enquête
Description
MilliOhm Meter
Brève introduction
AT518/AT518L handheld DC milliohm meter adopts high-performance 32-bit ARM processor. It’s a meter with high accuracy and wide measurement range. A long time, accurate and convenient measurements of passive components can be achieved on all occasions, with wide Measurement Range from 10μΩ to 20MΩ and maximum reading 20000. Wither temperature compensation interface, it can guarantee 0.05% accuracy even under the condition that the testing speed is under 15/s. its unique current testing mode can meet different testing requirements. AT518/AT518L is also equipped with Mini-USB interface to apply to remote control, data acquisition and analysis. AT518/AT518L series apply to various kinds of resistors, switches contact resistance, connector contact resistance, relay coils and contact resistance, transformers, inductors, moteurs, deflecting coiling resistance, welding contact conductor resistance, the metal riveting resistance of vehicles, boats, airplanes, printed circuit lines and crack detection and so on.
MilliOhm Meter
| SPECIFICATIONS | ||
|
AT518 Handheld DC Low Resistance Meter |
AT518L Handheld DC Low Resistance Meter |
|
| Précision de base | 0.05% | 0.1% |
| Mesures Gamme | 10μΩ~20MΩ | 10μΩ~200KΩ |
| Signal Source | I-Max: <1A Current
Mode: high current, low current |
I-Max: <1A Current
Mode: High Current |
| Gamme | Auto, manuel, nominal with 10 ranges |
Auto, manuel, nominal with 7 ranges |
| Vitesse | 30 t/s,15t/s,3t/s |
3 t/s |
| Result Display |
abdos, PER, SEQ compare way |
|
| Max-Reading |
20000 dgt |
|
| Adjustment |
Short-circuit Zero-Adjust for each range |
|
| Comparateur | Build-in sorting record, GD/NG sorting result display | |
| Trigger |
Interne, Manuel, Remote |
Manual and Internal |
| Test Lead |
4 terminal shielding (2 check terminal and 2 driving terminal) and external shielding ground section |
|
| Temperature Compensation | Précision: 0.2 °C Measurement Range: 0~80°C | None |
| Interface |
Build-in Mini-USB Interface(VCP) |
|
| Autres | 3.5 inches true-color 16M TFT-LCD display; Keypad lock; Data hold function; Compatible SCPI command set; switch in both Chinese and English; Adjustable Background light; Auto power-off | |
| GENERAL FEATURES | ||
| Source de courant (ATL909) |
Input: 100-240V~50/60Hz 0.35A. Sortir: 9V 1A DC |
|
| Batterie Paramètres |
8.4V,Li, 2200mAh rechargeable battery |
|
| Temps de charge |
Single continuous charging time: Max 300Min |
|
| Working Time |
≥8 hours |
|
| Taille |
Outside(mm): 130.23 (Largeur)x210.76(Hauteur)x37.88 (Depth), 650g |
|
| ORDERING INFORMATION | ||
| Accessoires | ATL501B: Four-terminal Kelvin Test Clip
ATL909: DC adaptor ATL202: Carrying bag ATL804: Li- batterie ATL105: Mini-USB communicable cable |
|
