TC-06 Thermal Diffusivity Tester

Paglalarawan

TC-06 Thermal Diffusivity Tester

Panimula

Ang thermal kondaktibiti tester na ito ay sumusukat sa thermal kondaktibiti, thermal diffusivity, and hot-melt of different materials by using heat flow method. Sumangguni sa standard na MIL-I-49456A Ang thermal kondaktibiti ng manipis na solid electric pagkakabukod init transfer pagganap pagsubok pamantayan, ASTMD5470-06, ISO12987-2000 YS/T63.3-2006, for testing the thermal conductivity of metal, composite material, carbon materials, graphite sheet, thermal silicone grease etc.

The instrument consists of the upper probe and its power adjustment system, the lower probe and its constant temperature system, the sample hot and cold surface test system, atbp.

TC-06 Thermal Diffusivity Tester

Pangunahing teknikal na mga parameter:

1, Laki ng sample: diameter 50, thickness 0-50mm

2, Thermal conductivity range: 2.0–200W/m.K, paulit ulit na pag uulit: ≤5%, reproducibility: ≤5%.

3, Upper probe: built-in heater, with Pt100 platinum resistance thermometer control its temperature at 60±0.1℃

4, Measuring head temperature control accuracy: ±0.1°C;

5, Upper probe display accuracy: ±0.01o C;

6, Lower probe accuracy: 0.001mV, using thermo heap method, the data is more accurate than a single sensor, more stable, more in line with the measurement of heterogeneous materials;

7, Thermostat: panlabas na paliguan ng tubig. The temperature of cooling water is controlled at 20±0.5℃.

8, Temperature measurement system: using differential thermo heap or Pt100 platinum resistance thermometer measurement sample cold and hot surface temperature difference, accurate to ±0.1.

9, Oras ng pagsukat 5 ~ 20 mga minuto;

10. Can be equipped with automatic preloading and manual preloading, constant pressure on the style contact surface.

11,Automatic thermal analysis and testing software is used to quickly and accurately analyze the parameters of the sample test process and output the report.

12, Environment temperature requirements: 10℃-25℃;

13. Suplay ng kuryente: AC220V/50Hz, power is not greater than 1.5KW