LGB Paint Hanging Slab

Paglalarawan

LGB Paint Hanging Slab

Pangkalahatang ideya:
Flow hanging is a description of the defects of paints and paints. During the construction on the vertical or inclined surface, during the period from coating film to drying, due to the downward movement of the wet film, the thickness of the coating film is uneven, and the phenomenon of forming a thick edge at the lower part is called flow hanging.
A common method for the determination of stream-hanging characteristics is to place a certain amount of samples or standard samples on a plate, and then place the plate vertically or at an Angle for a certain period of time, and determine the stream-hanging traces through simple comparative observation or correlation detection. The LGB plate is designed to adapt to this measurement method.
Through the measurement of flow hanging, it can be checked whether the formulation of paint or color paint is reasonable and whether the construction method is correct.

LGB Paint Hanging Slab

Structure and technical parameters:
The LGB plate is designed with four uniform volume spherical concave holes for placing samples or standard samples, which simply realizes the quantitative requirements; The high finish surface makes the flow trace more objective; The scale line marked by the imperial system facilitates the observation and evaluation of the convective hanging marks; Stainless steel material, easy to clean and maintain.
Cavity volume: 1.29cm3
Scale range: 0 to 10inch
Metric 1 ~ 25cm
Mga Dimensyon: 304×202×8mm
Timbang: 3.8kg

LGB Paint Hanging Slab

Precautions:
1. The reproducibility of the determination method depends on a stable climate at the time of determination and the setting of the same evaluation time.
2. After use, do cleaning and maintenance work in time; Use and collection should be handled lightly to avoid bumping.
3. The hanging plate is used for the determination of chemical raw materials, and the user should establish appropriate safety and health protection measures and determine the rules and regulations according to the relevant provisions before use. Safety issues related to contact with chemical raw materials shall be established by the user and are not within the scope of this specification.