KGQH-3Y-4S SF6 Recovery Charging Device

Paglalarawan

KGQH-3Y-4S SF6 Recovery Charging Device

Pagpapakilala sa Produkto
KGQH-3Y-4S SF6 gas recovery charging and discharging device has comprehensive functions such as recovery, singilin at discharging, pagdalisay, pag-vacuum, bottle filling, atbp. The system is relatively complete. Ang serye o paglipat ng bawat function ay higit sa lahat nagagawa sa pamamagitan ng pagpapatakbo ng electric control box at ang balbula ng bola sa isang panig ng panel.
The basic working principle of the recovery device is the high-pressure gas recovery method. Sa panahon ng pagbawi, the suction and compressibility of the compressor are used to suction SF6 gas at a certain pressure in the SF6 electrical equipment into the compressor and compress it to a higher pressure until the final pressure of recovery is reached.
When charging and discharging, the SF6 electrical equipment (or cylinder) and connecting pipeline are vacuum-vacuum-pumped by the vacuum pump of the device first, and then the SF6 in the storage container of the device is charged into the SF6 electrical equipment directly by using the pressure difference or the suction of the compressor to cause a certain pressure difference until the required working pressure is reached. SF6 is poured directly into the cylinder when filling is required.
The purification function is synchronously completed when the above recovery, charging and discharging functions are completed.

KGQH-3Y-4S SF6 Recovery Charging Device

Mga Katangian ng Produkto
1, the system is equipped with a number of oil separators, respectively installed in the compressor outlet, in order to effectively remove the SF6 gas with oil.
2, the system loop is provided with a filter dryer to ensure the purity of SF6 entering the storage container and effectively remove water. Ang filter ay may heating regeneration device, na maaaring pinainit at muling mabuo sa ilalim ng vacuum, para paulit ulit na magamit ang molecular sieve.
3, ang sistema ay nilagyan ng isang maaasahang kaligtasan proteksyon aparato, the safety valve is installed on the filter once the overpressure safety valve automatically opens the exhaust gas, the pressure drops automatically closed.
4, the system is also set up a monitoring instrument, kasama na ang vacuum gauge, naka-install sa inlet ng pagbawi ng aparato, and installed in front of the vacuum gauge DN6 valve, kailangan mabuksan kapag observation; Two pressure gauges, ayon sa pagkakabanggit na naka install sa pagbawi air inlet, SF6 compressor exhaust port.
5, the inlet of the vacuum pump in the system is equipped with an electromagnetic vacuum belt charging valve, and the vacuum pump is connected to the same power supply, when the pump stops working, the valve can automatically close the vacuum system, and the atmosphere is filled into the pump chamber through the pump inlet, so as to avoid the pump oil countercurrent pollution of the vacuum system.
6, ang kabuuang istraktura, ang aparato ay nagpapatibay ng mobile na itinutulak ng kamay, maaaring umangkop sa panloob at panlabas na normal na kondisyon ng kapaligiran. Ang sistema ng aparatong ito ay mas kumplikado, composed of vacuum pump, SF6 tagapiga, tubo ng tubo, iba't ibang mga balbula, mga instrumento at iba pang mga accessory.
7, ang electric control box, operating valves at monitoring instrumento ay ang lahat ng puro sa isang panig panel at may mga tagubilin sa proseso, kaya ito ay madaling gamitin.

KGQH-3Y-4S SF6 Recovery Charging Device